one for 8

在勤研的KY44B0X上移植好的UCOS276源码-ground in the research on transplantation KY44B0X good source UCOS276

ucOS移植到STC89C58RD上面的源代码(STC89C58RD ucOS transplanted to the above source code)

说明：  这是按照前面我发的从零开始学习ucosii手册，编写成功的模板。芯片是stm32f103c8t6，移植在f103芯片上，都是同理可得。记住虽然可以直接拿着用，但是要修改对应的IO口哦，程序效果是led小灯闪烁。（有一个问题我也不太清楚，理论上c8t6的启动文件应该是startup_stm32f10x_md.s，但是用它却不能成功。用startup_stm32f10x_hd.s却成功了。）(This is a successful template written in front of the uCOSII manual that I started from zero. The chip is stm32f103c8t6, and the transplant is on the F103 chip. Remember that although it can be used directly, but to modify the corresponding IO mouth Oh, the program effect is the LED light flicker. (there is one problem I'm not very clear about. In theory, c8t6's startup file should be startup_stm32f10x_md.s, but it can't be successful with it. It was successful with startup_stm32f10x_hd.s.))

Create a PIC18 port of the uC/OS-II real-time kernel. Note here PIC18 port means a version of the real-time kernel, not the I/O port of microcontrollers.

在arm7上移植ucos-transplant on the ARM7 ucos

在vc开发环境下实现uc/os+uc/gui+uc/fs，有助于初学者试验仿真学习参考-Development environment in the vc realize uc/os+ Uc/gui+ Uc/fs, the pilot will help beginners learn the reference simulation

我们自己开发的一个OSEK操作系统！不知道可不可以？-Our own development of a OSEK operating system! Can not know?

UCOS II源码 内含SOURCE 解压后使用 -UCOS II intron SOURCE source unpacked use

基于STM32+UCOS+GUI的MODUBS主从机，本人已删除应用层代码，但总体框架是稳定拿来就可用的。(STM32+UCOS+GUI based MODUBS master and slave machine, I have deleted the application layer code, but the overall framework is stable on the available.)

uc/os-II嵌入操作系统工程摸板。用于ARM7系列的移殖。-uc/os-II embedded operating system project template. For the ARM7 series of transplants.