用于ucos移植的一个小程序，应该会对大家有用

摩托罗拉处理器mpc855上的UCOS移植代码-Motorola processor mpc855 the UCOS transplant code

里面有串口驱动使用程序。将ucos移植到了stc单片机上。(Serial driver to use the program. Ucos transplant to stc microcontroller.)

主要实现功能： 1 tcp server并发（主要涉及文件app_lwip.c、app_tcp_server.c） 2 网线热插拔（主要涉及文件app_lwip.c、app_tcp_server.c） 3 不重启修改ip地址（主要涉及文件app_lwip.c、app_tcp_server.c、app_key.c（按键修改ip地址）） 4 将lwip的数据接收从中断方式改成单独的接收任务方式（主要涉及文件app_lwip.c） 5 usb串口信息打印（115200波特率） 6 注意：使用的stm32的HAL库而不是标准库(The main functions are: 1 TCP server concurrency (mainly related to file app_lwip.c, app_tcp_server.c) Hot plugging of 2 network lines (mainly related to documents app_lwip.c, app_tcp_server.c) 3 do not reset the IP address (mainly related to file app_lwip.c, app_tcp_server.c, app_key.c (key modify IP address)) 4 change the data reception of LwIP from the interrupt mode to the individual receiving task (mainly involving the file app_lwip.c) 5 USB serial port information printing (115200 baud rate) 6 note: the HAL Library of the STM32 used instead of the standard library)

ucos系统+file文件系统+GUI显示器接口 系统源码(ucos system+ file file system+ GUI display interface system source code)

ucos3 在LPC1788上的移植过程及源代码文件，希望可以帮助大家(ucos3 on the LPC1788 transplant process and the source code files, hope it can help you)

ucos操作系统源码，包括所有的源文件和头文件(ucos operating system source code, including all source and header files)

4.3寸 LCD显示 STM32 代码 采用uCOS-II方式(4.3-inch LCD display STM32 code)

著名嵌入式操作系统ucosii全部源代码，ucostii是一个相当使用的rtos。-Ucosii all well-known embedded operating system source code, ucostii is a very use rtos.

整理非常好,学习嵌入式操作系统的可以看看!有价值!可以学到许多满经典的设计方法! -Finishing a very good study of the embedded operating system can look at! Valuable! Can learn a lot over the classical design method!

UCOS-II2.76在ADI-BF533上的移植.在UCOS-II网站提供的源码基础上修改了几处汇编代码.采用2.76版系统内核移植,在DSP++4.0上调试成功-UCOS- II2.76 the ADI-BF533 the transplant. In UCOS-II site on the basis of the source of several amendments compiled code. Using version 2.76 kernel transplantation, the DSP 4.0 Debugging success