著名嵌入式操作系统ucosii全部源代码，ucostii是一个相当使用的rtos。...

研一的ucosii在s3c2440的移植源代码，有详细的移植说明，icosii版本：2.86。ads1.2下的mcp工程。使用ucosii及2440的朋友绝对不可错过。-Kenichi ucosii the S3C2440 transplant in the source code, a detailed description of the transplant, icosii Version: 2.86. ads1.2 works under the MCP. Ucosii and 2440 the use of friends should not be missed.

uctcpip的BCF5272的driver-uctcpip the driver of the BCF5272

UCOS/II for ICCAVR - The version of UCOS/II is 2.04 - the original port was done by Ole Saether for the IAR compiler. Jens E. Holtegaard ported one version using ICCAVR. Joerg Meyer did another port (using Jens port as a start?). This is basically Joerg s port plus a little bit of changes and documentation by me. - YOU MUST DOWNLOAD THE MAIN PART OF THE UCOS/II FROM THE UCOS/II WEBSITE http://www.ucos-ii.com . The supplied project file assumes the portable source is in the ..source directory. - Joerg has written couple document showing the stack frames etc. but it is in German :-) They are included in this directory. - The Timer2 overflow interrupt is used for Timer Tick. If you want to change that, modify os_cpu_c.c and os_cpu_a.s - I have tested this using ATMega103 with and without external RAM using AVR Studio simulator. See test1.c test program. Both Code Compressed (PRO) and STD versions have been tested. -UCOS/II for ICCA

ucos实时操作系统移植的讲解，可以参照移植到ARM处理器中-ucos real-time operating system migration talks, can refer to transplanted into the ARM processor

UCOS源程序-UCOS source

uCOS-III V3.03.01 uCOS-II V2.92.07在STM32F2移植

ucos在小模式下的移植程序-CENTER small model of transplant procedures

UCOS的LWIP 1.10

ucos2源代码，嵌入式系统中使用最为广泛的操作系统-ucos2 source code, embedded systems the most widely used operating system

S3C44B0下的ucos程序。并包含了udp/ip网络通讯同能。-S3C44B0 under the procedures OUT. And contains udp/ip network communication can be the same.