深入解析了USB的核心技术，很有参考价值

at91sam9261 usb 功能测试程序。iar工程格式-at91sam9261 usb functional test procedures. iar project format

使用68013的测试程序，包含68013固件程序（采用slave FIFO bulk同步读写，EP2 OUT，EP6 IN），驱动，PC端测试用程序。CPLD的VHDL代码-Test procedures for the use of 68,013, including 68,013 firmware (using the synchronous slave FIFO bulk read and write, EP2 OUT, EP6 IN), driver, PC-side test procedures. VHDL code of CPLD

usb鼠标开发的全部打包资料-usb mouse development of the full package of information

包括了usb传输的集中协议，令usb的硬件开发成为过去.-including a focus on the transmission usb agreement, usb hardware development the past.

这个是AD采集的程序，只有对特定的采集卡才有用，而且需要采集卡供应商提供采集卡端口USB2.0驱动程序才能用。-This is the AD collection procedures, and only on the specific acquisition card can use, but also acquisition card providers USB2.0 port capture card driver can be used.

闻亭仿真器驱动 TDSS510 JTAG EMMLATOR-Wen Ting-driven simulator TDSS510 JTAG EMMLATOR

这个程序用180行C代码就能够读取FAT16文件系统U盘的根目录,可以看到根目录下的文件名,并可显示首文件内容,不过,该程序很不严谨,也没有任何错误处理,对U盘兼容性较差,只是用于简单试验,作为参考.这个程序可以支持WINDOWS按FAT16格式化的U盘,因为程序精简,所以只兼容超过50%以上的U盘品牌,如果换成CH375A芯片则兼容性可提高到85%,当然,如果使用WCH公司的子程序库或者正式版本的C源程序兼容性更好-this procedure with 180 OK C code can read FAT16 file system drives the root directory, we can see the root directory under the file name, would show the first document, but the very stringent procedures, and there is no error handling, the U-poor compatibility, but for the simple the pilot, as a reference. this procedure can be supported by Windows FAT16 formatted U disk, because the procedure is streamlined and therefore only compatible with more than 50% of the U-brand, if chips were replaced CH375A compatibility can be increased to 85%, if the company"s use of WCH Subroutine Library or an official version of the C source better compatibility

USB的驱动程序源代码,好东西，大家一起来分享,-USB driver source code, good things, everyone will work together to share

实现从Pc中通过usb口读取数据，能够显示usb设备的相关信息。-From a Pc to read data through usb port, usb device can display the relevant information.

rs232到usb的转换器host-USB-RS232 to USB converter host-USB