PCusb,一个读取串口原程序,VC++6.0

源码程序包，很不错的东西！希望感兴趣的可以下了-source package, a very good thing! Interested hope they can look at the ````````````````````````````

keyword:usb host sl8

USB设备端固件程序,枚举部分是全部程序的基础和重心,只有主机对设备枚举成功后,主机才能和设备进行正常的通信 USB的枚举过程分为4个状态. 1.接入态 v主机检测到USB设备插上,击活端口,并发送复位命令(保持10ms) 2.默认态 v主机使用默认地址读取设备描述符 (GET_DESCRIPTOR) v主机分配给设备一个总在线的唯一地址 (SET_ADDRESS) 3.地址态 v主机从新的地址获取设备描述符(GET_DESCRIPTOR) v主机获取所有设备的配置描述符(GET_DESCRIPTOR) 4.配置态 v主机设置描述符(设备,配置) (SET_CONFIGURATION) v主机读取配置状态(可选) (GET_CONFIGURATION) v主机读取接口状态(可选) (GET_INTERFACE) -USB device-side firmware, enumerate all part of the foundation and focus of the procedure, only the host of equipment after the successful enumeration, the host and equipment in order to engage in normal communication USB enumeration process is divided into four status. 1. Access state v host detected USB devices plug in, hit live ports, and send the reset command (to maintain 10ms) 2. default state v Use the default address of the host to read device descriptor (GET_DESCRIPTOR) v host assigned to the equipment of a total online only Address (SET_ADDRESS) 3. A

USBlib C# version,用C#实现libusb-USBlib C# version，implement the libusb with C#

10分钟完成一个USB驱动程序-10 minutes to complete a USB Driver

U盘与硬盘相关文档-U disk drives and related documents

数据采集程序，采用同步模式，包括主机程序，固件源程序，驱动程序。出自《USB2.0原理与工程开发》我现在需要USB键盘方面的源程序，如果你有请提供crzman@163.com-data collection procedures, using the synchronization mode, including mainframe procedures, firmware source, the driver. From "USB2.0 Principle and the development of the project," I now need a USB keyboard aspects of the source, If you please provide crzman@163.com

波形发生器bulktransferTARGET-waveform generator bulktransferTARGET

实现U盘或移动硬盘插入和退出时得到事件响应，用户可以自己处理-Realization of U disk or mobile hard disk to be inserted into and exit in response to the incident, the user can handle

USB数据采集及传输模块的设计-USB data acquisition and transmission module design