LPC1788评估板

W25Qxx.c W25Qxx.h 华邦公司W25Qxx系列Flash驱动。 可以直接工程使用。注意大端小端模式。-W25Qxx.c W25Qxx.h

QT2410开发板的测试代码，包括所有功能的测试演示代码，可以说把这里面的代码搞清楚之后对ARM2410的开发基本上没有问题了。-Test code for QT2410 development board, including test and demo code for all the functions on the board. It is safe to say that if you could understand these codes, you ll have no problem with ARM development.

比较器输入微芯片dsPIIC30F程序示例

bootloader

sample code for the protocol spi atmega-sample code for the protocol spi atmega88

用单片机控制键盘的程序,利用中断获得键盘扫描码并转换为ASCII码，在1602液晶上显示字符。C语言编写，KEIL环境下编译，键盘驱动写得相当好。-Single-chip microcomputer to control the keyboard with the procedure, the use of interrupted access to the keyboard scan code and converted to ASCII code, in the 1602 character LCD display. C language, KEIL compiler environment, keyboard-driven written a very good job.

U-Boot1.1.2是最为常用的嵌入式系统Bootloader，这个版本是目前的最新版本-U-Boot1.1.2 is the most commonly used in embedded system Bootloader, this version is the latest version

ISD1400语音电路-ISD1400 voice circuit

real time RTOS

基本的时钟中断程序--Basic clock interrupt program.