VB调用USB接口智能卡的应用例程，在希望…

200元买来的D12开发资料,包括上位机驱动和应用程序，电路图，固件。-200 yuan bought D12 development information, including PC drives and applications, schematics, firmware.

使用68013的测试程序，包含68013固件程序（采用slave FIFO bulk同步读写，EP2 OUT，EP6 IN），驱动，PC端测试用程序。CPLD的VHDL代码-Test procedures for the use of 68,013, including 68,013 firmware (using the synchronous slave FIFO bulk read and write, EP2 OUT, EP6 IN), driver, PC-side test procedures. VHDL code of CPLD

USB的 这次 我这只有两个可以上载 谁能告诉我怎么办-USB of the only two I can upload Can anyone tell me how to do

HID规范和一个基于CYPRESS FX2 的例子，自己做的哦！很有参考价值！-norms and a HID-based CYPRESS FX2 example, do for myself! Great reference value!

USB硬件检测软件-USB hardware detection software

USB设备端固件程序,枚举部分是全部程序的基础和重心,只有主机对设备枚举成功后,主机才能和设备进行正常的通信 USB的枚举过程分为4个状态. 1.接入态 v主机检测到USB设备插上,击活端口,并发送复位命令(保持10ms) 2.默认态 v主机使用默认地址读取设备描述符 (GET_DESCRIPTOR) v主机分配给设备一个总在线的唯一地址 (SET_ADDRESS) 3.地址态 v主机从新的地址获取设备描述符(GET_DESCRIPTOR) v主机获取所有设备的配置描述符(GET_DESCRIPTOR) 4.配置态 v主机设置描述符(设备,配置) (SET_CONFIGURATION) v主机读取配置状态(可选) (GET_CONFIGURATION) v主机读取接口状态(可选) (GET_INTERFACE) -USB device-side firmware, enumerate all part of the foundation and focus of the procedure, only the host of equipment after the successful enumeration, the host and equipment in order to engage in normal communication USB enumeration process is divided into four status. 1. Access state v host detected USB devices plug in, hit live ports, and send the reset command (to maintain 10ms) 2. default state v Use the default address of the host to read device descriptor (GET_DESCRIPTOR) v host assigned to the equipment of a total online only Address (SET_ADDRESS) 3. A

Cy7c68013的一个数据采集的方案，里面有方案USB的固件，驱动，以及上位机程序-CY7C68013 a data acquisition program, there are programs USB firmware, drivers, as well as the PC program

易于嵌入的USB HOST模块rar 易于嵌入的USB HOST模块rar-A USB host module for embedded system.

数据采集卡，采用同步传输模式。包括主机程序，固件源程序，驱动程序。出自《USB2.0原理与工程开发》我现在需要USB键盘方面的源程序，如果你有请提供crzman@163.com-data acquisition cards, using asynchronous transfer mode. Including mainframe procedures, firmware source, the driver. From "USB2.0 Principle and the development of the project," I now need a USB keyboard aspects of the source, If you please provide crzman@163.com

用CY7C630芯片做USB转串口的汇编原程序,里面有编译生成的hex文件.写入芯片就可使用.最高波特率为24-do with CY7C630 chip USB to Serial compilation of the original procedure, which has compiled documents generated hex. The chips can be used. The highest baud rate for 24