lpc2300 技术笔记开发例程 usbExample

基于ARM7的ucosii程序，移植好的(ARM7-based ucosii program, good transplant)

在KEIL下使用UCOS来编写程式，还不错(in UCOS KEIL use to write programs, but also good)

UCOS/II for ICCAVR - The version of UCOS/II is 2.04 - the original port was done by Ole Saether for the IAR compiler. Jens E. Holtegaard ported one version using ICCAVR. Joerg Meyer did another port (using Jens port as a start?). This is basically Joerg s port plus a little bit of changes and documentation by me. - YOU MUST DOWNLOAD THE MAIN PART OF THE UCOS/II FROM THE UCOS/II WEBSITE http://www.ucos-ii.com . The supplied project file assumes the portable source is in the ..source directory. - Joerg has written couple document showing the stack frames etc. but it is in German :-) They are included in this directory. - The Timer2 overflow interrupt is used for Timer Tick. If you want to change that, modify os_cpu_c.c and os_cpu_a.s - I have tested this using ATMega103 with and without external RAM using AVR Studio simulator. See test1.c test program. Both Code Compressed (PRO) and STD versions have been tested. -UCOS/II for ICCA

一段基于ucos系统的程序，运行在S3C2440上，方便测试(A UCOS system based on the program, run in S3C2440, easily test)

在skyeye软件下ucos-ii移植、lwip移植的仿真，并且有网卡芯片rtl8019as的驱动-the transplantation of ucos-ii and lwip

ucgui下的GIS引擎简陋版，采用ucgui为绘图GUI,演示GPS坐标与屏幕坐标变换，实现轨迹回放功能，放大缩小功能，不能演示，但也具有，没完善-GIS engine under ucgui simple version, using ucgui for mapping GUI, presentation screen GPS coordinates and coordinate transformation, achieve trajectory playback, zoom function, not presentation, but also not perfect

uc/os2.52在ARM44b0移植成功的代码，已验证-The successful source code of the uc/OS 2.52 port to the ARM 44B0 ,and being tested

将本站的UCOSFORAVR128V276版本升级到了280版，修正原来的中断定义错误，并仿真调试已通过。(UCOSFORAVR128V276 the site will upgrade to version version of the 280, that the interruption of the original definition errors, and debugging simulation has passed.)

UCOS 在ARM9_S3c2410上的移植，本程序在我的硬件上调试没有任何问题，是我自己移植的UCOS 和网上其他的移植代码有些不同，本程序已经在工程中稳定运行1 年。-UCOS ARM9_S3c2410 on in transplantation, this procedure in my hardware debugger without any problems, is my own uCOS transplantation and other transplant-line code is somewhat different, the procedures have been in the works in stable operation for 1 year.

uc/os 嵌入式操作系统pc机调试仿真工具-View utility running on PC windows enviroment for debugging uC/OS-II target software.