Msp430的flash读写文件配置文件，(msp430f427芯片)

DSP下载工具的原理图和PCB图,适合用于自己设计DSP开发板-Download tools, DSP and PCB schematic diagram, suitable for use in their own design DSP development board

课程设计做的基本程序，可实现串口通信，定时，键盘扫描等功能！-Curriculum design to do the basic procedures can realize serial communication, timing, keyboard scanning and other functions!

电子密码锁程序，可以密码在线修改，延时锁定，密码重置等功能 -Electronic password lock program, you can change your password online, delay lock, password reset and other functions

用89S52编的的蜂鸣器发声，有点简单，但最为一个发声的实力来说足够了-89S52 series with the buzzer sound, a bit simple, but most of the strength of a voice enough for the

数字时钟--51单片机 可以用KEY调整时间，已经通过验证-Digital Clock- 51 Singlechip KEY can be used to adjust the time has passed validation

关于2407的sci串口扩展实现dsp的串行通信以及关于地址的问答-on the 2407 sci Serial Port Expansion achieve dsp serial communications and addresses on the Net

采用tenx TMU3110开发的一个HID的示例程式 包括单片机程式 ,PC端USb接收程式-used tenx TMU3110 development of a program HID examples include SCM programs, PC program receiving end USb

十路无线智能器抢答器的程序源代码，功能基本都考虑到了，包括倒计时启动和暂停，终止，重启，倒计时设定-10 Lu wireless smart device Responder program source code, the basic functions are taken into account, including the countdown to start and be suspended, terminated, restart the countdown settings, and more

视觉暂留，编程从一个I/O口输出一扫频信号，驱动一支LED灯闪动，频率范围为10HZ~99HZ，扫描时间为30秒，在LED闪动期间观察，一旦发现无法识别LED灯闪动时，按下按键K1，立即停止输出，并将此时的信号频率显示在数码管上，该信号的周期为测试者的视觉暂留时间。-Persistence of vision, programming from an I/O port outputs a sweep signal to drive an LED light flashing, the frequency range of 10HZ ~ 99HZ, scan time of 30 seconds, the LED flashing during the observation, once found it impossible to identify the LED lights flashing, press the key K1, immediate cessation of the output, and at this time the signal frequency displayed on the digital control on the test cycle of the signal" s persistence of vision time.

环境CodeWarrior4.6. freescale 9s12dg128实时中断demo程序。 实现CPU的实时中断功能的例程。每100ms小灯闪烁。-CodeWarrior4.6.freescale 9s12dg128 environment in real-time interrupt demo program. Realize real-time CPU interrupt routine. Small lights flicker every 100ms.