在WinAVR ST7565点

nrf24e1有关PWM的源码程序，通过keil c验证，在相应的开发板上调试运行过-nrf24e1 the PWM of the source program, verified by keil c, in the corresponding development board debug run-off

一个电子产品开发时的部分c代码E!绝对能用!-When an electronic product development part of c code E! Absolutely can!

ADC0809是广泛使用的模／数转换器，在可不采用外部总线结构的单片机系统中(如 由AT89C51组成的系统)。ASC0809的数据线直接与单片结构的I／0 口相连，并由单片机的I／O 口直接对ADC0809进行控制。-ADC0809 is widely used in analog/digital converters, in not using the external bus architecture in the single-chip microcomputer system (such as the composition of the system by the AT89C51). ASC0809 data lines directly with the monolithic structure of I/0 I connected the MCU I/O port directly to control the ADC0809.

S3C2450_51_16的PCB布线文档，做板子的要看看啦-S3C2450_51_16 the PCB layout files, do the board" s look at看啦

包含了msp430单片机上的ADC、定时器A、定时器B、基础时钟、看门狗的初始化及中断程序。基本示例程序-Msp430 on a single chip that contains the ADC, timer A, Timer B, basic clock, watchdog and interrupt the initialization process.

自行车里程设计的远程序 他的用途很实际的 并且说明详细-bicycle mileage from the design process he uses a very practical and detailed note

2.0TFT屏S6D0118driver的驱动程序及其点屏的资料-2.0TFT screen S6D0118driver driver information screen and the point

c8051f的IIC读取eeprom,有很好的程序结构，具有通用性，经修改后能用在任何单片机中的IIC操作中-c8051f eeprom read the IIC, a very good program structure is universal, , as amended, can be used in any single-chip-IIC operation

DS1302的C语言程序例子-DS1302 C language program examples