单片机实现通信工程实践Ｃ语言代码，欢迎有兴趣的朋友下载，因为是自己收集的代码没有仔细研究，希望对大家有用处！...

8051web server

凌阳单片机nrf2401模块程序源代码， 用于无线收发模块，经测试无误-Sunplus Singlechip nRF2401 source code modules for the wireless transceiver modules, have been tested and accurate

IEEE 1394 火线协议标准-IEEE 1394 FireWire protocol standards

这是我自己写的18B20驱动程序，不需修改，做的温度计精度很高。大家在做温度采集明无需修改，只需添加上既可使用。-This is what I wrote it myself, 18B20 driver without modification to do high precision thermometer. We do no need to modify the temperature acquisition out, simply add the can use.

本程序用at16实现两根线(两个i/o口)+8片74164+一片ULN2003驱动24个LED数码管,通过串口写入要显示的数,可以在很多地方应用 -at16 the procedures used to achieve two lines (2 i/o) are 8 1 74164 24 ULN2003 drive LED digital control through serial write to show that the number can be applied in many places

51单片机“心形”音乐电子贺卡源码，挺好使，可做成品生产-51 Single-chip

收录了许多51单片机的汇编程序，完全可以用于移植开发。同时，也对51学习者进行学习提供了很好的学习教材。

CF8051F040开发板的 flash_download程序-CF8051F040 development board

单片机系统上电后，P0 口和 P1 口都被清 0。然后，你规定一个由 6 个数字构成的序列（每个数字从 0～F 中选取），比如 E、8、9、0、7、F。然后每次当单片机检测到外部中断 0发起中断时间时，读取 P0 口和 P1 口上的状态值，当连续 6 次外部中断事件的对应的数字序列构成你所设定的序列后（举例来说，如果 P0.0 是 1，P0 和 P1 的其他管脚是 0，那么我们称为检测到一次数字 0），从串口打印输出一幅类似下图的 16×16 的ASCII码的圣诞树图片。-Single-chip microcomputer system after power, P0 and P1 mouth I have been ching 0. Then you set a six figure constituted by the sequence (each number from 0 ~ F in selected), for example, E, 8,9,0,7, F. And then each time a single-chip detects external interrupt 0 initiated interruption time, I read the P0 and P1 mouth on the state value, when a row 6 times the corresponding external interrupt events constitute digital sequence set your sequence (for example example, if P0.0 is 1, P0 and P1 of the other pin is 0, then we called a number of detected 0), a printout from the serial port under similar 16 × 16 map of the ASCII code of the Christmas tree图片.

这是一个AVR单片机的电子教程，对于初学AVR单片机的人来说是个比较不错的资料！-This is a single-chip electronic AVR tutorials for beginners who AVR MCU is a relatively good information!