ARM7―LPC2124―LCD开发实例 基于Keil uVision3源码开发再进行Proteus 7 联合对ARM7―LPC2124―I2C硬件电路仿真...

LPC2132驱动128*64点阵液晶，并且在界面显示时钟。本程序实现了对液晶的驱动，实现了内带时钟的设置等功能，并且有日期对应星期的算法。-LPC2132 driver 128* 64 dot matrix LCD, and display interface clock. This procedure to realize a liquid crystal driver, achieved with the clock settings within the functions and have the date of the corresponding week algorithms.

详细介绍MSP430芯片及源代码，有兴趣的可以下载看下-MSP430 chips, and details of the source code, anyone interested can download Kanxia

应用背景本项目采用试剂盒firebull / firedragon103与STM32F103VE显示2个ADC通道（我使用 ；LM35温度显示仪表）和GLCD为线图。我是ST库来做这个项目，所以你可以使用KeilC建立这个项目和运行在firebull。或使用可映射引脚GLCD和ADC上运行的其他试剂盒关键技术STM32的ADC通道DMA STM32F103VE ST GLCD firebull喷火龙

我编的用matlabe语言编的4psk调制解调的程序 可是解调后，恢复64点的星座图了， -series of the language used matlabe 4psk series of the modulation and demodulation process demodulation However, restore 64 points of the constellation,

SIM300初始化源码,包括开机命令，PIN码等-SIM300 initialization code, including the boot order, PIN code, etc.

基于arm7板的录音程序，在三星的板子上测试通过-Based on the ARM7 board recording procedures, the Samsung

周立功提供的基于菲利普ARM的LPC2200微控制器的图形库源程序-based Philips LPC2200 ARM Microcontrollers the graphics library source

学习一下LPC936的DA转换问题? 有用到LPC900的AD、DA即可-lpc936 ad

学习arm必备的书，里面列出了arm可能遇到的问题-Learning arm essential book, which lists the possible problems encountered by arm

SMALL RTOS是为小ram系统单片机编写的,目前仅在51系列单片机上成功运行,还没有在其它单片机上移植(目前我仅有51和avr的开发系统).在小ram系统单片机如51系列上运行tcp/ip 协议栈是不太现实的.一般tcp/ip 协议栈需要在32位单片机上运行,在8位机上运行太勉强(51是8位机),除非您只运行ip协议.建议使用ucos/ii操作系统或是嵌入式linux,并选用arm或龙珠系列单片机-SMALL RTOS for small microcontrollers ram system, written in 51 series of microcontrollers currently only on the successful operation, no other MCU on the transplant (currently I am only 51 and avr development system). In the small ram System-on- machines such as the 51 series of films running on tcp/ip protocol stack is not very realistic. General tcp/ip protocol stack need to run 32-bit microcontrollers in the 8-bit machine running Taimian Jiang (51 is the 8-bit machine), unless you run only ip protocol is suggested. ucos/ii operating system or embedded linux, and use arm or Pearl Series MCU ..