sdram_cmd命令集

very nice program that i ensure anyone can use easily and will be efficient for hard project of elevator

H.265的FPGA实现！！使用Verilog语言开发。(H.265 FPGA implementation! Developed using Verilog language.)

文件用于驱动TFT屏，分辨率800*400，平台为quartus13，芯片为cycloneIV(The file is used to drive the TFT screen with a resolution of 800*400. The platform is quartus 13 and the chip is cyclone IV.)

FPGA驱动TCD1304AP线阵CCD，并经采集将数据通过串口传输至上位机(FPGA drives TCD1304AP linear CCD, and by collecting the data transmitted through the first bit machine serial)

复旦cpu COS

FIR滤波器的VHDL源代码及测试文件，已通过编译仿真，绝对正确。(FIR filter VHDL source code and test files, has passed the compiled simulation, absolutely correct.)

用FPGA实现 VGA显示的图像显示控制器设计 用VHDL实现 硬件实现是屏幕上面出现彩色条纹(VGA display with FPGA image display controller design Using VHDL hardware implementation is colored stripes appear above the screen)

matlab仿真2ask和4ask.可观察信号的时域波形和频谱图。(Matlab simulation 2ask and 4ask. Can observe the signal time domain waveform and spectrum.)

简单uart，verilog语言编写，已经经过测试，有需要的可以看看(Simple uart, Verilog language, has been tested, you can see if you need it)

说明：  通过按键输入学号，并循环显示： 电路功能描述：通过Ego1上的按键输入自己的学号（8位10进制数），并存储在32位的寄存器中；8位10进制数输入完成后，实现滚动显示效果。(Enter the student number by pressing the key, and display it in a cycle: Circuit function description: input one's own student number (8-digit decimal number) through the key on ego1, and store it in 32-bit register; after the completion of 8-digit decimal number input, the scrolling display effect is realized.)