内置T6963C的液晶图形模块的详细资料

自制的数字电压表，用的的是AD0809这个芯片，希望能有用对大家。-Self-made digital voltage meter, is used in the AD0809 chip, hoping to be useful for everyone.

STC89C51RCRD系列内部EEPROM数据存储（C语言）说的可是天主教单片机啊！

HCS08的AD例程：本程序是ADC模块的例程，所用资源为单片机内部ADC转换模块， 所接器件为电位器.-HCS08 s AD routine: This is the ADC module of the routine procedure, the use of resources within the ADC conversion for the microcontroller module, the device is connected potentiometer.

利用带AD的单片机开发的单片机程序，能够进行ad，程序调试通过，结果发送到电脑上，通过串口-AD use with single-chip microcontroller development process, to carry out ad, program debugging through, the result is sent to the computer through the serial port

HT44780 液晶显示驱动 里面有简单 程序和说明-HT44780 driver inside the liquid crystal display has a simple procedure and description

usb to 232 学习作下在线的资料-usb to 232 to learn to make the next line of information

8253的初始化程序举例: 例1：选择2号计数器，工作在3方式，计数初值为533H（2个字节），采用二进制计数。其初始化程序段为 MOV DX，307H ；命令口 MOV AL，10110110B ；2号计数器的初始化命 令字 OUT DX，AL ；写入命令寄存器 MOV DX，306H ；2号计数器数据口 MOV AX，533H ；计数初值 OUT DX，AL ；选送低字节到2号计数器 MOV AL，AH ；取高字节送AL OUT DX，AL ；后送高字节到2号计数器 -8253 initialization procedures examples : Example 1 : Select counters on the 2nd, in three ways. Counting for the initial 533H (2 bytes), a binary counting. Initialization of its procedures for MOV DX, 307H; I ordered MOV AL, 10110110B; on the 2nd Counter initialize command word OUT DX, AL; write commands Register MOV DX, 306H; data on the 2nd Counter I MOV AX, 533H; Counting initial OUT DX, AL; low-byte sent to the 2nd Counter MOV AL, AH; With a high-byte send AL OUT DX, AL; evacuations high byte counter to the 2nd

c51的实例，学习时做的，看你们有没得用哈-C51 example, learning when to do to see you have not to use Kazakhstan

单片机控制的步进电机 不是很完善 但是能实现基本功能-Single-chip stepper motor control is not very perfect but can realize the basic functions of

用AVR单片机实现对时钟芯片DS1302的spi驱动，来读取和写入时间-AVR Microcontroller with the right of the spi clock chip DS1302 drive to read and write times