一款优秀的串口监视工具

RS232.cpp and RS232.h for Serial COM Port Communication

1、本实验箱采用的液晶显示屏内置控制器为SED1520，点阵为122x32，由两片SED1520组成，由E1、E2分别选通，控制显示屏的左右两半屏。-1, the experimental use of the boxes built-in LCD controller for SED1520, to 122x32 dot matrix, composed of two SED1520, E1, E2 respectively strobe control screens around two semi-screen.

这是我做的关于考勤机的一些测试程序，请大家积极下载，很有帮助。-This is my appraisal done on the plane of some testing procedures, please download positive and helpful.

RS232 C51的通讯程序,根据自己的需要稍做修改,就可以使用了.-RS232 C51" s communication procedures, according to their own needs minor changes, you can use.

《Visual C++ 串口通信技术与工程实践》（代码）7.1节

一个串口测试程序，包括源代码，供大家学习-A serial port test program, including source code for all to learn

一个VC++做的短信发送程序，在第一次运行的时候记得设置本地的区号，-A VC++ Message sent to do the procedure, the first time to remember to run set up a local area code,

用FPGA实现RS232，代码经过测试通过-FPGA implementation using RS232, the code has been tested through

ATMEL的at91rm9200开发板的U-Boot文档-ATMEL at91rm9200 development board of the U-Boot Documents

使用说明： 系统要求：WIN9X/ME/NT/2000 VC++6.0 且安装了VC ACTIVEX控件（在VC6安装时选上） 免费 简介：在VC++6.0中用MSComm控件编程，可以实现串口接收数据和发送数据，数据分别显示在接收框和发送框中。-Usage: System Requirements: WIN9X/ME/NT/2000 VC++ 6.0 and installed VC ACTIVEX controls (in VC6 installation selected) Free Introduction: In VC++ 6.0 using MSComm control programming can be achieved Serial receive data and send data, data were displayed on the receiver box and sent box.