华邦单片机的红外发送源码,已经投入生产。其中的功能主要是把信息通过红外发送到上位机。...

LPC915的I2C模块配置为主机时的接口程序，可直接添加到工程里使用-LPC915 I2C module configuration for the host interface can be directly added to the used in the project

　C8051F330/1 MCU 有一个可编程内部高频振荡器、一个可编程内部低频振荡器和一个外部振荡器驱动电路。可以通过对 OSCICN 和 OSCICL 寄存器编程来使能/禁止内部高频振荡器和调节其输出频率（参看振荡器框图）；可以通过对 OSCLCN 寄存器编程来使能/禁止内部低频振荡器和调节其输出频率（参看图9.3）。系统时钟可以由外部振荡器电路或任何一个内部振荡器提供。表9.1给出了内部振荡器的电气特性。 -C8051F330/1 MCU has a programmable internal high-frequency oscillator, a programmable internal low frequency oscillator and an external oscillator drive circuit. Can register on OSCICN and OSCICL programming to enable/disable the internal high-frequency oscillator and adjust its output frequency (see diagram oscillator) OSCLCN can register through the programming to enable/disable the internal low frequency oscillator and adjust its output frequency (see Figure 9.3). System clock can be external oscillator circuit, or any provision of an internal oscillator. Table 9.1 gives the electrical characteristics of the internal oscillator.

要用ImageCraft IDE for ICCAVR开发环境。 是ucos在atmel 的AVR单片机上的移植，具备 很高的参考价值！-use IDE for ICCAVR development environment. CENTER is in the ATMEL AVR on graft, with high reference value!

这是sitronix（台湾省公司）lcd驱动ic被应用在51低速单片机上的代码。-This is sitronix (Taiwan Province of the company) lcd driver ic used in 51 low-speed single-chip code.

利用8051单片机驱动蜂鸣器，实现音乐发声功能。-8051 drivers to use buzzers realize music vocal function.

D/A7513可以用于调试 1602显示器-D/A7513 display 1602 can be used to debug

单片机温度控制系统-SCM temperature control system

LT_1B msp430开发板例子程序－UART11_0115k_2

ts12864-3液晶驱动程序，可用，可显示文字和图形-ts12864-3 LCD driver that can be used to display text and graphics

这是一个就算波特率的软件，功能强大，在单片机通信时不用自己动手计算，只要用此软件点击一下，就能得到结果。-This is a software that even if the baud rate, powerful, in the MCU communicate without it-yourself basis, as long as the click with this software, you can get results.