电动广告灯箱控制器程序，实现定时打开，可设置画面停留时间，等功能。...

基本的开方的小程序，学习时所写，算不的好，是本人学习汇编的习作，请多指教。-basic prescribing of small programs, written study, it is not good, I study is a compilation of the exercises, please enlighten.

1) 东西方向车辆放行20秒钟。即东西方向的绿灯和南北方向的红灯同时点亮20秒钟； 2) 20秒钟后，东西方向的黄灯闪烁2秒钟，以警示车辆将切换红绿灯。此时南北方向仍维持红灯点亮。在南北方向亮红灯期间，在2位数码管上显示计数值（每秒减1），从20减至01。 3) 东西方向的黄灯闪烁2秒钟后，转为南北方向放行20秒钟。即东西方向的红灯和南北方向的绿灯同时点亮20秒钟； 4) 南北方向放行20秒钟后，转为南北方向的黄灯闪烁2秒钟，以警示将切换红绿灯。此时东西方向仍维持红灯点亮。 5) 南北方向的黄灯闪烁2秒钟后，再转为东西方向车辆放行20秒钟。如此循环重复。 -1) direction vehicle release 20 seconds. What is the direction of red and green light at 20 seconds, 2) 20 seconds later, the yellow lights flashing warning vehicles with 2 seconds, switch to the traffic lights. This is still remain red light north-south direction. In the south during the red light, in the direction of the digital display tube of 2 per plan (minus 1), from 20 to 2001. 3) the yellow lights flashing direction to 2 seconds later, the south direction release 20 seconds. What is the direction of the north-south direction of red and green and light 20 seconds, 4) north-south direction after 20 seconds to release the north-south direction, yellow lights flashing warning, with 2 secon

at89s51控制飞利浦高频头接收有线电视的源程序-Philips AT89S51 control cable TV tuner to receive the source code

该程序是实现数字钟的实现 ，并且有相应的界面。-The program is to achieve the realization of digital clock, and a corresponding interface.

首先，分别对8255、8253进行初始化，设置8255为A口、C口输出，设置8253的计数器0为工作模式3；其次，设置IRQ7的中断矢量，使得有IRQ7中断时调用SERVER；再次，调用INIT对计数值初始化；最后，主程序循环等待中断，开始秒表的计时。 2、 INIT子程序-First, the 8255,8253 initialization, set for the 8255 A-C mouth output, set 8253 as the Counter mode 0 3; Second, set up the interruption vector there, make it there interruption call SERVER; Again, call curl_setopt early to count before; Finally, the cycle of waiting for the main program interruption began stopwatch time. 2, curl_setopt Subroutine

LED矩阵代码

ajax php wiki source code

QAM16编码 QAM16编码 QAM16编码 QAM16编码-QAM16编码QAM16编码QAM16编码QAM16编码QAM16编码QAM16编码QAM16编码

PIC18F252/452 bootloader-PIC18F252/452 Bootloader

读DS18B20的序列号，读进片内RAM里，KEILＣ环境下用汇编语言编译调试成功-DS18B20 Reading the serial number, read into the RAM chip in, KEILC environment using assembly language compiler debugging success