本代码为基于TMS320VC5402的多种滤波方法的代码程序

AVR单片机的一些事例程序说明,有关程序-Some examples of AVR MCU description of the procedures, the procedures

c51 led菜单 程序 功能 上下选择菜单-c51 led program features up and down menu selection menu

一个七段码编写成的时钟，有整点报时的功能，可以进行闹钟功能，并且有秒针仿真功能，嘿嘿，王建荣的作业呦-apsodkjf

相关的codewarrior工程 范例 非常好用的啊,大家不要错过! -related codewarrior works very handy example of the ah, we should not miss!

这个比较完整注释什么的都全还有开平方. 并且格式也很好看,干净.-Note the relatively complete what are all still open square. And format is also very good looking, clean.

密码锁， 实现密码判断，实现密码更改，实现程序正常结束，实现非软件的准确延时，输入错误3次后自动结束程序，根据操作产生的不同结果配以不同的音效 -Password lock, password realize judgment achieve password change, the end of the normal implementation process, the accurate implementation of non-software delay, enter the wrong end of 3 times after the program automatically, under the operation of the different results produced with different audio

液晶显示器LCM320240驱动程序，和触摸驱动程序。-LCM320240 liquid crystal display drivers, and touch driver.

PIC16F877实现按键扫描和数码管显示、蜂鸣片同时DD响，当按键下时，数码管加一，蜂鸣片DD响两次。-PIC16F877 to achieve key-scan and digital tube display, beep sound piece at the same time DD, when the button when you are not, the digital control plus one, beep piece DD ring twice.

固定值的加法。我用bx和ax作为寄存器。bx表示第一个固定值，ax表示第二个固定值，然后将其相加。

,片选接到p1.5 复位端 p1.4 中断端接到 int0 82c250工作在斜率模式下 ，RS 接51k电阻到地。 2，SJA1000与82C250的接口，逻辑上为SJA1000输出0（显性位），表现为低点平输出给82C250，则82C250输出 差分的低电平。SJA1000输出1（隐性位），表现为高电平或悬空输出给82C250，则82C250输出悬空状态。 3,周立功的中SJA_BCANCONF.ASM中对输出控制寄存器 的TX0的输出 极性的位的定义不对。 还有里面定义有接收错误标志码，不知道何时用。-, The election received a P1.5-chip client p1.4 interrupt reset int0 82c250 client received in the slope mode, RS then 51k resistor to ground. 2, SJA1000 with the 82C250 interface, logic for SJA1000 Output 0 (dominant bit), showing low level output to the 82C250, while the low-level differential output 82C250. SJA1000 Output 1 (recessive), and the performance of the output is high or left vacant to the 82C250, the vacant state 82C250 output. 3, Zhou Ligong in the SJA_BCANCONF.ASM of output control register TX0 output polarity bit the definition of wrong. Inside the definition also has to receive error flag code, I do not know when to use.