zigbee 2430 演示 就是个演示程序么 说这么多干嘛 晕

利用的 AT89S51 的移动消息显示在 led 矩阵的 8051 单片机的编程。

本文提出了一种可扩展的多通道时钟和数据恢复体系结构，它利用了多通道时钟的同步性

nano2410linux的led驱动，适合初学linux设备驱动的朋友。-nano2410linux the led driver, linux device driver for beginner friends.

下面是嵌入式C代码，用于在LCD上生成自定义字符。

有关的线路连接  GND – GND, VCC – 3.3V, CS – D8, CSN – D9, SCK – D10, MOSI – D11, MISO – D12, IRQ – D13 这个测试程序是发射端不断发送0x00到0XFF的数据给接收端

c8051f020控制1602正确显示程序，欢迎参考-1602 display correctly c8051f020 control procedures, please refer to

Part I We wish to display on the 7-segment displays HEX3 to HEX0 the values set by the switches SW15−0. Let the values denoted by SW15−12, SW11−8, SW7−4 and SW3−0 be displayed on HEX3, HEX2, HEX1 and HEX0, respectively. Your circuit should be able to display the digits from 0 to 9, and should treat the valuations 1010 to 1111 as don’t-cares. 1. Create a new project which will be used to implement the desired circuit on the Altera DE2 board. The intent of this exercise is to manually derive the logic functions needed for the 7-segment displays. You should use only simple VHDL assignment statements in your code and specify e

DM642EVM 系统原理图，硬件设计参考-Schematic of DM642EVM

用C33 STAR 开发板构成GPS定位系统-with C33 development board constitute a GPS positioning system

此代码为市面上流行的DS1302实时钟芯片的驱动-this code for the fashion DS1302 bell-chip drive