232同485转换的pcb图，有需要的只要稍加修改一下就可以了

LCD的工作原理，包括LCD的液态晶体介绍，扫描技术，显示模块等等！-LCD working principle, including the LCD liquid crystal, the scanning technology, display modules and so on!

波轮式全自动洗衣机的单片机控制.很实用的--Using SCM to control an automatic laundary machine.

Dhry c51源代码,参考-Dhry decoder source code reference

基于Ramtron公司的VRS51L3074高性能8位单片机的MP3(VS1003)驱动程序,程序在Keil环境编译,程序内自带一段15K左右的MP3文件,可以直接播放测试.-Based on Ramtron" s VRS51L3074 high-performance 8-bit microcontroller MP3 (VS1003) drivers, programs, the environment in the Keil compiler, the program comes with a 15K or so inside the MP3 files can play test.

8051F040的can总线底层驱动开发程序，可以移植到项目中。-The bottom of the can bus 8051F040-driven development process, can be transferred to the project.

pc与单片机好东西，不错的，快来下，好vusdfhvuisdfhviusdfhvoijsd 。-pc with Singlechip good things, good, come under the good vusdfhvuisdfhviusdfhvoijsd.

uip源代码（for 8/16位单片机）-East source code (for 8/16-bit microcontroller)

单片机的串口调试程序，可实现简单的串口通信-Single-chip serial debugging procedures can realize a simple serial communication

使用键盘上的上、下、左、右四个按键，可以分别控制led1,2,3,4, 每个LED 对应的Port 请参考“实验平台介绍”说明文档。要求按下 上面提到的四个按键中间的一个按键后，该按键对应的led 被点亮，持续1 秒钟以后led 熄 灭。-Use the keyboard on the upper and lower, left, and right buttons, can control led1, 2,3,4, each LED corresponding to the Port, please refer to " experiment on" documentation. Requirements of the four above-mentioned press the middle button of a button, the button that corresponds to being light led, continuous 1 second later led out.

基于ＰＩＣ单片机的ＶＦ转换程序，可用于驱动３相电机-PIC MCU-based VF conversion process can be used to drive 3-phase motor