关于ucos

移植到Atmega8515的uc/os,可应用于一些低端产品-transplanted to the uc/os can be used in a number of low-end products

提出了一种基于UCOS和UCGUI的数字存储示波器的软件时序逻辑状态机实现技术，硬件上采用FPGA+ARM的 结构，充分利用FPGA在逻辑控制、高速信号采集方面的优势，以及ARM核心在LCD波形刷新、人机接口以及通信协议处 理的灵活性，在提高系统整体性能和可靠性的同时简化了系统的软件和硬件结构。(UCOS proposed based digital storage oscilloscope and UCGUI software sequential logic state machine technology, the use of FPGA+ ARM hardware Structure, full use of the advantages of FPGA logic control, high-speed signal acquisition aspects, as well as ARM core in the LCD waveform refresh at the man-machine interface and communication protocols Reasonable flexibility in improving overall system performance and reliability while simplifying the software and hardware architecture of the system.)

博创UP-NETARM2410-S实验箱源码：Exp2 ARM AD接口实验-Fiberxon UP-NETARM2410-S experimental box source: Exp2 ARM AD Interface Experiment

在网上好不容易找到的有关ucos移植到gba上的代码，有需要的可以下载看看，有关内容可以和作者联系-the Internet is not easy to find the relevant CENTER transplant impressions on the code, the need to be able to download a look at the contents and the author can be linked

uCOS-II v2.52 在lpc2000系列ARM上的移植源代码，配合相应的工程模板使用,在ads1.2中调试通过。-uCOS-II v2.52 lpc2000 series of ARM in the transplant source code, the corresponding works with the use of templates in which ads1.2 through debugging.

ucos移植论文集-It s an uCOS transplaning dissertation.

这是uOsII在VC++下的模拟源代码，我编译通过-This is uOsII in VC++ source code under the simulation, I have compiled through the

MC68hc908JL16的UCOSII代码-MC68hc908JL16 the UCOSII code

ucos51通用板调试系统-ucos51 GM board system debugging

本人自己移置的ucosii2.76代码，适用于lpc22xx,lpc21xx，目前已经在实际项目中使用，代码中提供有建好的项目。开发环境为ads1.2。-shift their own ucosii2.76 code applies to lpc22xx, lpc21xx, now in the actual use of the project, code for the project is completed. Development environment for ads1.2.