嵌入式实时操作系统uCOS

可直接用于Atmel AT91SAM7X256_EK板的简单Web服务器程序， AT91SAM7X256（MAC)+DM9161AE（PHY），Web程序中设定的IP地址192.168.131.200,MAC地址 00-30-6C－00-00-02详见emac_lib.h与ethernetif.c,可在IE浏览器中输入查看，注：MDIX跳线未短接时，PC与EK板均需要通过UTP网线接至交换机，MDIX短接时可用网线直连PC。-Can be used directly Atmel AT91SAM7X256_EK board a simple Web server program, AT91SAM7X256 (MAC)+ DM9161AE (PHY), Web procedure set IP address of 192.168.131.200, MAC address 00-30-6C-00-00-02 see emac_lib.h and ethernetif.c, in IE browser, enter the view, note: MDIX when the jumper is not shorted, PC and EK boards come through UTP cable connected to the switch, MDIX cable shorted available when Direct Connect PC.

此为整套uC/FS程序，内含示例工程，运行绝对无错误、无警告，更关键的是内含详尽的英文使用手册。(wonderful～)

2410开发板上键盘与LED的驱动实验，采用ZLG7290芯片-2410 development board keyboard and LED Drivers experiments using ZLG7290 Chip

ddfhergklsf frsfjkerwghllfnewrge(gsrthresrgefrev ferwge grfwerg wefewr egfwe)

本人自己移置的ucosii2.76代码，适用于lpc22xx,lpc21xx，目前已经在实际项目中使用，代码中提供有建好的项目。开发环境为ads1.2。-shift their own ucosii2.76 code applies to lpc22xx, lpc21xx, now in the actual use of the project, code for the project is completed. Development environment for ads1.2.

在51系列单片机上移植 在51系列单片机上移植-in 51 MCU transplantation in 51 transplant MCU

在C8051F120内移植uCOS-II，可运行。绝对可用。-C8051F120 transplantation in uCOS-II, can be run. Absolutely available.

ucosii系统下移植文件系统，实现SD卡的初始化，读写操作

基于 ucos/II 的串口程序。在51单片机上移植实现，实验通过(Based ucos/II serial procedures. Transplant on 51 SCM implementation, experiment)

一个外国牛人做的ucos2向mcf5307的移植，很有参考价值-a foreign cattle are doing ucos2 mcf5307 to the transplant, of great reference value