用REDBOOT引导WINCE的说明，对WINCE开发有参考价值

给出Linux 环境下USB驱动的模块层次结构，包括主控制器驱动、USB 核心驱动和USB设备驱动程序组成，以及USB 接口摄像头驱动模块的层次结构，对底层usbvideo 模块进行分析，对usbvideo 中的函数进行了分类，修正其设计上的一个缺 陷，给出上层微型驱动的实现，最后通过移植USB 摄像头驱动程序到三星公司的SMDK2410 开发板的试验成功，使该驱动成 功应用在基于Linux 的嵌入式系统上。-Given Linux environment USB drive module hierarchy, including the host controller driver, USB core driver and USB device drivers, as well as camera USB interface drive module hierarchy of the underlying module usbvideo analysis, in usbvideo function of classification, to amend the design of a defect, given the realization of the upper micro-drive, and finally through the transplantation driver USB camera to Samsung SMDK2410 development board of the experiments are successful, so successful application of the driver in the Linux-based embedded systems.

硕士学位论文全文。CAJ格式--Design of AT91M40800-based embedded industrial controller. A Master degree thesis. CAJ format.

主要完成在uc-os2操作系统对dsp的资源控制和调度，包括一些初始化工作等 --It mainly does some resource control and configuration for dsp in uc-o2 operation system, like some initialization.

应用背景这是一个闹钟实现 ；功能一个数字闹钟在FPGA板。它是用Verilog语言，它是一个数字时钟程序相当成功地在FPGA开发板上运行。相比其他语言Verilog语言是更有用的和可靠的，这个计划包括了各种模块，你可以开发板上的模拟。关键技术时钟技术，连同连接的FPGA和下面的开关 同时，时钟开始。报警可以设置使用的FPGA板上的DIP开关设置。这是通过对应的DIP开关二极管。反不变当警报响起，蜂鸣器声音通过扬声器放大像。

在嵌入式系统中用CPU下载CPLD的代码，这是最后将VME文件转成HEX文件的代码。--Download CPLD through CPU in embedded system. This is the code to convert VME file to HEX file in the end.

无线遥控主机程序，对应的与无线遥控副机程序配合使用。-wireless remote mainframe procedures, corresponding with wireless remote control deputy with the use of aircraft procedures.

启动“新建项目向导”，并在收到请求时添加所有程序集（*.asm），

由 Xilinx 提供的 IIC 接口，使用 AXI interface。 Features ‧ AXI interface is based on the AXI4-Lite interface ‧ Master or slave operation ‧ Multi-master operation ‧ Software selectable acknowledge bit ‧ Arbitration lost interrupt with automatic mode switching from master to slave ‧ Calling address identification interrupt with automatic mode switching from master to slave ‧ START and STOP signal generation and detection ‧ Repeated START signal generation ‧ Acknowledge bit generation and detection ‧ Bus busy detec ‧ Fast mode 400 KHz operation or standard mode 100 KHz ‧ 7-bit or 10-bit addressing ‧ General call enable or disable ‧ Transmit and receive FIFOs - 16 bytes deep ‧ Throttling ‧ General purpose output, 1 bit to 8 bits wide ‧ Dynamic Start and Stop generation ‧ Filtering on the SCL and SDA signals to eliminate spurious pulses

I2C的驱动程序(包括头文件及底层的C子程序)-I2C drivers (including the first document and the bottom of the C subroutine)

登陆注册登陆注注册注册注册注册注册注册注册注册