some examples of LCD character display via EZUSB

实现了PC机和外接硬件实验台的通信，查找设备，根据设备的参数和性能进行连接...对于硬件学习者有很好帮助作用。-Realize the PC and external hardware test-bed of communications, search equipment, according to equipment and performance parameters for the hardware to connect ... to help learners have a very good role.

usb receive main program c

ARM7+D12开发U盘的资料(中文)，想用来玩u盘的同志们下载看看吧-ARM7 development of the U-D12 information (Chinese), would like to play for the u-download comrades see it

USB Manager(usbmgr) 0.4.8 Shuu Yamaguchi Special Helper: Philipp Thomas When USB devices connect to or disconnect from a USB hub, the usbmgr works as the following according to configuration. a) It loads and unloads files Linux kernel modules. b) It execute file to setup USB devices.-USB Manager(usbmgr) 0.4.8 Shuu Yamaguchi Special Helper: Philipp Thomas When USB devices connect to or disconnect from a USB hub, the usbmgr works as the following according to configuration. a) It loads and unloads files Linux kernel modules. b) It execute file to setup USB devices.

这是一个测试MP3的程序，通过USB口来测试此款MP3是否出现了功能故障,或者此MP3是否是出厂状态，实现了从PC上层直接控制下层硬件的范例.-This is a test MP3 procedure for the adoption of USB MP3 Photo Player to test whether there is a functional fault, or whether this is manufactured MP3 state, from the PC to achieve the direct control of the upper class hardware model.

HID规范和一个基于CYPRESS FX2 的例子，自己做的哦！很有参考价值！-norms and a HID-based CYPRESS FX2 example, do for myself! Great reference value!

参考着写其他的驱动程序就可以了。-other reference was made to the driver on it.

USB设备端固件程序,枚举部分是全部程序的基础和重心,只有主机对设备枚举成功后,主机才能和设备进行正常的通信 USB的枚举过程分为4个状态. 1.接入态 v主机检测到USB设备插上,击活端口,并发送复位命令(保持10ms) 2.默认态 v主机使用默认地址读取设备描述符 (GET_DESCRIPTOR) v主机分配给设备一个总在线的唯一地址 (SET_ADDRESS) 3.地址态 v主机从新的地址获取设备描述符(GET_DESCRIPTOR) v主机获取所有设备的配置描述符(GET_DESCRIPTOR) 4.配置态 v主机设置描述符(设备,配置) (SET_CONFIGURATION) v主机读取配置状态(可选) (GET_CONFIGURATION) v主机读取接口状态(可选) (GET_INTERFACE) -USB device-side firmware, enumerate all part of the foundation and focus of the procedure, only the host of equipment after the successful enumeration, the host and equipment in order to engage in normal communication USB enumeration process is divided into four status. 1. Access state v host detected USB devices plug in, hit live ports, and send the reset command (to maintain 10ms) 2. default state v Use the default address of the host to read device descriptor (GET_DESCRIPTOR) v host assigned to the equipment of a total online only Address (SET_ADDRESS) 3. A

LPC214xLPC_USB,固件程序,周立功的,就不用我评价了吧-LPC214xLPC_USB, firmware, Zhou Li-gong, and I would not have evaluated it