腾华LPC1788-EK用户光盘

freescale ep100 ECT捕捉中断程序，按程序中代码初始化即可启动使用捕捉中断，代码已经经过调试。-freescale ep100 ECT capture interrupt program, according to the procedure in the initialization code to activate the use of capture interrupt, the code had already been debugging.

基于ARM(2410)GPIO的嵌入式小键盘驱动程序,提供了6个按键的支持.-Based on ARM (2410) GPIO embedded small keyboard driver, provides support for six keys.

uboot移植文档 1.2 2009 skyey模拟-uboot 1.2 2009

计算机主板PCB图，powerpcb格式，是布板的极好的参考资料。-The computer

基于arm下的linux操作系统中的驱动程序-Under the arm-based linux operating system drivers

在这个项目中我使用 lm 35 在 pic 单片机中显示分界，我配置 adc 将模拟转换为数字，显示在液晶屏上您可以在任何地方使用此项目

适用于cpld或fpga，产生多种频率波形，-Apply to cpld or fpga, generate multiple frequency waveform,

一个bmp文件到16进制数组转换的工具，可以应用于嵌入式系统中的LCD哦。-bmp files to a 16-band array conversion tool can be used in embedded system LCD oh.

单片要c8051f040中使用LCD测试程序例程-Test program of c8051f040 LCD

MCUProductionProgrammer  Silicon Lab In-system programming  involves programming devices after installation inthe end system. In this scenario, access to the debug pins (JTAG or C2 interface) is provided in the end system to enable connection to a programming “Master”. This pro-gramming “Master” can bea Silicon Labs Serial Adapter (EC2), custom hardware, or for JTAG devices, a JTAG Boundary Scan test system that supports the programming ofSilicon Labs devices.