C8051系列单片机开发与C语言编程！详细解释…

avr 源代码 mega16 例程 大约30个 -avr source code mega16 routine about 30

有关OSD开发和ADI公司的几款ADC软件控制-OSD-related development and ADI

一个万能学习型红外遥控模块的程序，可学习各种类型的红外码，可作为智能家居系统中的一个控制模块。-A universal infrared remote control module learning process can learn all types of infrared codes can be used as a smart home system control module.

MSP430系列单片机适用小程序，请勿用于商业用途，仅供学习参考之用。-MSP430 MCU small application procedures, please do not be used for commercial purposes, only to learn reference.

c8051f340双串口通信源码/ -dual serial communication c8051f340 source /

c51无参数调用asm-decoder called with no arguments asm

用LPC2132驱动SPI接口FLASH的c驱动程序，调试完全通过-SPI interface with LPC2132 Driver FLASH

24LC256的C51驱动程序, 采用8052系列单片机-24LC256 C51 driver

功能： 1、作为主机通讯采集两路下位机数据并将此数据通过8255送出（十路水位值） 并计算水头送STC板 2、采集数据为BCD码制，先转换成二进制，处理后再转换成BCD 3、通讯采用方式3，多机通讯，上位机发地址时TB8=1，其他TB8=0 下位机SM2=1，RB8=1时产生中断后使SM2=0收发数据，结束后SM2=1 在此系统中本机硬件地址要设为0-Features: 1, as the host of two-way communication acquisition of data-bit machine and send this data through 8255 (the road level 10 value) and calculate the head sent to STC board 2, for BCD code data collection system, the first converted into binary, and then deal with the conversion into BCD 3, communication using methods 3, multi-machine communications, address PC made TB8 = 1, other TB8 = 0 under the digital machine SM2 = 1, RB8 = 1 when the failure to make SM2 = 0 to send and receive data, after the end of SM2 = 1 in this system to the local hardware address set to 0

DS18S20是一种典型的1-Wire总线接口温度传感器，由Dallas Semiconductor公司生产。DS18S20数字温度传感器提供了9位高精度的摄氏温度测量，同时具有非易失性、用户可编程上下触发门限的报警功能。由于其独特的1-Wire总线接口，使得其可以占用极少的I/O引脚资源，使用起来十分方便-DS18S20 is a typical 1-Wire bus interface, temperature sensor, manufactured by Dallas Semiconductor. DS18S20 digital temperature sensor provides high-precision 9 Celsius temperature measurement, both non-volatile, user-programmable upper and lower trigger threshold alarm. Because of its unique 1-Wire bus interface, making it can take up very little I/O pin resources, is very convenient to use