ucos移植论文集

STM32 中ucos的编写程序,系统时钟配置函数,主任务-Ucos of STM32 in programming, system clock configuration function, the main task

在ucos2上，做了相关修改，正对es44b0开发板(failed to translate)

对于该开始学习嵌入式软件的人，采用phlip公司LPc系列芯片的人大有帮助。主要是完成的开发模板-began studying for the embedded software, the company used phlip LPc series chips NPC help. Main completed the development of a template

这是操作系统中的写者优先算法的实现绝对正确-this is the operating system was the priority algorithm to achieve absolutely correct

ucos基于motorola经典的龙珠系列的移植代码-OUT on the Pearl motorola classic series of transplant code

STM32F303的UCOS工程 支持硬件浮点运算 具有OLED屏显示 具有2路DA功能 具有AD采集(The STM32F303 UCOSII project Support floating-point hardware With the OLED screen display With 2 DA function With AD acquisition)

可直接用于Atmel AT91SAM7X256_EK板的简单Web服务器程序， AT91SAM7X256（MAC)+DM9161AE（PHY），Web程序中设定的IP地址192.168.131.200,MAC地址 00-30-6C－00-00-02详见emac_lib.h与ethernetif.c,可在IE浏览器中输入查看，注：MDIX跳线未短接时，PC与EK板均需要通过UTP网线接至交换机，MDIX短接时可用网线直连PC。-Can be used directly Atmel AT91SAM7X256_EK board a simple Web server program, AT91SAM7X256 (MAC)+ DM9161AE (PHY), Web procedure set IP address of 192.168.131.200, MAC address 00-30-6C-00-00-02 see emac_lib.h and ethernetif.c, in IE browser, enter the view, note: MDIX when the jumper is not shorted, PC and EK boards come through UTP cable connected to the switch, MDIX cable shorted available when Direct Connect PC.

一个不错的介绍UCOS-II的文档，相当不错，有源码，和书比起来感觉还是很不错的-A good introduction to UCOS-II of the document, is quite good, with source code, and the feeling of the book is still very good compared to the

在PC上使用BC31调试uCOSII时所需要加载的uCOS与硬件相关的移植文件的PC头文件。-use of the PC BC31 uCOSII debugging required when loaded with hardware for uCOS related to the shift PC planting document headers.

MC9S12系统单片机， ucos操作系统移植(MC9S12 System Single Chip Microcomputer and uCOS Operating System Transplantation)