192X64液晶的80c51单片机语言液晶驱动文件，汉字库取模，图像取模...

本文是我学习ARM开发以来的一些经验总结，以自己设计的S3C44B0X板为例，给出我调试开发ARM开发板的一些最基础知识。我只是在自己的开发板调试过并且经验有限，有些知识只能做为参考，不一定准确，就算给大家一个“例程”吧，如果大家有不同意见，希望多多指正！-ARM since learning some lessons learned, in their own design S3C44B0X an example, I presented the development and debugging of the ARM development board some of the most basic knowledge. I was only in their own development boards tuned and limited experience, some knowledge only as a reference, not necessarily accurate, even if everyone with a "routine" for the country, if we have different opinions, many correct!

DS18B20+LCD1602显示温度实验，使用atmega128单片机，是很好的单总线技术和LCD1602显示控制的学习资料，已经过测试

周立功 smartarm2200 i2c例子-Week Ligong smartarm2200 i2c example

avr单片机的ad转换例程 可以拷贝过来直接使用-avr SCM ad conversion routines can be copied directly from the use of

3000TB51配套实验例程 1八段数码管显示实验 等-Experimental routine 3000TB51 matching one eight digital tube display experiments

MCB517 I2C源碼。，用於Freescale芯片系列；供需要研究I2c或iic源代碼的同好參考。當初的取得來源已經忘了。This file contains example code to print over the serial  port of the MCB517 MCU and Evaultion Board (EVAL-MCB517QS).    This example will test the I2C function of the MCB517.    This will be done by writing and reading from    a serial A/D & D/A (P8591).     This example will bit bang two general I/O ports for I2C   The example work with communicate at: 9600, 8, N, 1.    This code was tested using the mon-51 connected through COM-1    of the eval board.    CPU Frequency: 11.0592 MHz 

seed 的dsp程序s eed 的dsp程序-dsp procedures seed of the dsp program s eed of s eed procedures dsp

飞思卡尔功率计控制源代码

s3c2410的启动代码，包括BSP和多个测试程序。用ADS1.2编译。用JTAG下载到Nor或是NAND 进行启动-S3C2410 s startup code, including the BSP and multiple testing procedures. ADS1.2 compiler used. Nor with JTAG download or activate NAND

这是致远电子 MagicARM2410实验箱上基础实验的ADC编程原代码-This is the electronic MagicARM2410 Jhihyuan me on the basis of experimental trials ADC programming source code