ucos2.52 transplant on the Controller

μCOS-II study book,μCOS-II study book,μCOS-II study book,μCOS-II study book,

这个是可以直接在红牛开发板上运行的uCOSIII+uCGUI,3.2TFT屏， FWLib3.5+uCOSIII3.03+uCGUI3.98红牛开发板！(This is directly in the Red Bull development board running uCOSIII+uCGUI, 3.2TFT screen,)

对于该开始学习嵌入式软件的人，采用phlip公司LPc系列芯片的人大有帮助。主要是完成的开发模板-began studying for the embedded software, the company used phlip LPc series chips NPC help. Main completed the development of a template

本资料介绍了一些uCOS-II下的常见应用程序例子-Introduce some of the information uCOS-II applications under the common examples

UCOS II V2.80 移植到freescale的qe128上面的源代码。并且包含UCOS II V2.80的源代码-UCOS II V2.80 transplanted to the freescale qe128 above the source code. UCOS II and contains the source code V2.80

avr ucos 不错的学习代码 AVR Studio WINAVR-2005** VMLAB3.12(avr ucos Atmega16 AVR Studio WINAVR-2005** VMLAB3.12)

1.板上的8 个按键分别分别代表数字1-8，按下一个按键将结果通过串口发送到PC机上显示； 2.使用两个定时器模块，分别定时为1ms 和100ms 产生中断，使用它们分别 产生1s的定时时间，将时间分别显示到数码管上； 3.外接PS/2小键盘，将按键的值通过串口显示到PC机上。(A panel of eight key representing the number 1-8 press a key the results sent through the serial port on a PC display (2) use two timer modules, respectively, of 1ms and 100ms timer generates an interrupt, use them, respectively, Produce the timing of the 1s, the time display to the digital control External PS/2 keyboard, the key value of displayed through the serial port to a PC.)

基于ARM应用的源码，在英培特实验板上验证通过-ARM-based application source code, the tissue culture experiments in the United Kingdom through board certification

uCOS-II在51上的移植源码V1.1-uCOS-II at 51 on the transplant source V1.1

s3c44b0的ucos系统移植程序,在ads环境下的源码-The ucos transport on the s3c44b0,and in the ads enviroment