UCOS II V2.80 移植到freescale的qe128上面的源代码。并且包含UCOS II V2.80的源代码...

基于ARM应用的源码，在英培特实验板上验证通过-ARM-based application source code, the tissue culture experiments in the United Kingdom through board certification

BOOT实验SDT-BOOT tests SDT

smartarm2200开发板上，minigui消息处理实验源程序-smartarm2200 development board. Minigui experiments news source

著名的uCOS II 在ARM7 上的移植-famous uCOS II ARM7 transplant

μC/GUI 是一种用于嵌入式应用的图形支持软件。它被设计用于为任何使用一个图形LCD 的应用提供一个有效的不依赖于处理器和LCD 控制器的图形用户接口 指针实现(μC/GUI is a graphical support software for embedded applications. It is designed for any application using a graphical LCD to provide a valid pointer to the graphical user interface does not depend on the processor and LCD controller)

压缩包中有基于ucos系统下的常用程序，有tim捕获，串口查询，串口中断，定时器中断，温度读取。(Compressed package based on common procedures under ucos system, there are tim capture, serial query, the serial port interrupt, timer interrupt, temperature reading.)

这是本人调用small rtos51的函数来仿真写的基本代码-This is a small rtos51 I call a function to write the basic code simulation

本文将指导读者一步步完成 LwIP 在 ADS1.2 开发环境下的移植工作，包括底层驱动的编写。本文使用的硬件平台是 AT91SAM7X256 + RTL8201BL(PHY)，至于软件平台，读者从本文标题即可看出。-This article will guide the reader step by step to complete LwIP ADS1.2 development environment in the transplant, including the preparation of the underlying drivers. This hardware platform is AT91SAM7X256+ RTL8201BL (PHY), As for the software platform, readers can see from the article title.

ARM7下的UC0S原代码-ARM7 under the original code UC0S

Keil下的uCOS-ii+GUI(ForLPC214x)-Keil under uCOS-ii+ GUI (ForLPC214x)