UCOS2在51上的移植源码。学习UCOS

内容：1、本程序用于测试4相步进电机常规驱动 2、需要用跳帽或者杜邦线把信号输出端和对应的步进电机信号输入端连接起来 3、速度不可以调节的过快，不然就没有力矩转动了 4、按s4（设置成独立按键模式）可以控制正反转 -Contents: 1, the procedure used to test the four-phase stepper motor-driven two conventional, need to jump cap or the signal output line of DuPont and the corresponding stepper motor signal input terminal connected three speed adjustment can not be too fast, Otherwise, there would be no moment of rotation of the four, according to s4 (set to form an independent key mode) can control the positive inversion

基于时间触发调度器的直流电机闭环控制 -Time-triggered scheduler based on the DC motor closed-loop control

MSP430的CRC程序设计实现，位运算和查表法-MSP430 realize the CRC program design, digital computing and look-up table method

很好的AT89C51的中文说明书 费了很大劲才找到的-AT89C51 good Chinese manual costs a lot劲才found

利用ADC12内部温度传感器测量室温，并将测量结果显示在数码管上-use ADC12 internal temperature sensor measuring room temperature, the measurement results are displayed on the digital pipe

IC卡读写程序(c51)不错-IC card reader (c51) Yes

英飞凌C167的32位循环冗余校验码产生例子。-infineon C167 CRC32

p87lpc76x单片机程序-Singlechip p87lpc76x procedures

BH1415F调频台控制C程序。使用AT89C52单片机，12MHZ晶振，用共阳四位LED数码管。频率数据转换为显示用BCD码函数。-C FM BH1415F control procedures. AT89C52 single-chip microcomputer use, 12MHZ crystal, with a total of four LED digital tube Yang. Frequency data into a display function using BCD code.

51单片机基础驱动源码，有12864液晶和超声波收发源码及DS18B20温度传感器驱动源码等-51 SCM-based driver source code, there are 12864 LCD, and send and receive ultrasonic source and DS18B20 temperature sensor-driven source code, etc.