12位高速数模转换芯片TCL5620驱动程序

飞利浦RC522芯片源代码。该芯片主要针对三表市场和手持设备，支持I2C/SPI/UART接口。 先发布基于普通51单片机的驱动源代码，采用串口接口，无需中断。只要接一个串口，后续会发布基于飞利浦LPC9401的读写源代码！LPC9401也是基于51核，只需连接SPI接口！有公司拿这个源代码卖钱哟-Philips RC522 chip source. The chip targeted at three tables and handheld devices market, support I2C/SPI/UART interface. Based on the first general release 51 MCU-driven source code, using serial interface, without interruption. As long as a serial port access, the follow-up will be issued based on the Philips LPC9401 write source code! LPC9401 is based on the 51 nuclear, only connecting SPI interface! A company with the source code acquisition yo! !

8051F02X系列单片机的A/D转换子程序-8051F02X Series MCU A/D conversion subroutine

这个程序是基于有MMC下的SPI接口驱动程序源代码-This procedure is based on the MMC under the SPI interface driver source code

八路模拟采集显示电路　可对模拟信号进行采集　并用数码管显示-Eight-way acquisition display circuit simulation can be carried out on the analog signal acquisition and digital display

measure coin used 89c52,which use two Timers -measure coin used 89c52, which use two Timers

这个程序是用TI的单片机MSP430实现的PWM波形的输出。-This procedure is the realization of TI s MSP430 microcontroller PWM output waveform.

用 PIC16F73 做的温控器,压缩包中有硬件排版图、原程序、还有编译好的 HEX 文件。-PIC16F73 do with the temperature control device, compressed packages of hardware layout map, the original procedure, compiled HEX file.

以太网控制器cs8900a和DsP的TCP/IP通讯。DSP采用2812.-DsP Ethernet Controller cs8900a and the TCP/IP communications. DSP using 2812.

本文件是一个3*4键盘扫描显示程序, 初学者往往对此类问题感到头疼, 本人特上传一个供大家参考.-This document is a 3* 4 keyboard scan showed procedures, beginners often on such issues headache, I would like for you to upload a reference.

HomePlug解决方案的最新firmware，供大家参考-HomePlug solutions to the latest firmware, for your reference