Based on the uCOS mega128 reference source, the compiler has passed, only to lea...

S3C2410移植uCOS-II源码,ADS1.2编译通过,附详细操作步奏.-S3C2410 transplant uCOS-II source, ADS1.2 compiler is passed, the playing of detailed step-by-step operation.

lwip for ucosii porting

iptv机顶盒源码,包括原理图在内，UCOS-II系统-iptv set-top box source, including schematics, including, UCOS-II system

uctcpip的LXT971A的driver-uctcpip the driver of the LXT971A

可直接用于Atmel AT91SAM7X256_EK板的简单Web服务器程序， AT91SAM7X256（MAC)+DM9161AE（PHY），Web程序中设定的IP地址192.168.131.200,MAC地址 00-30-6C－00-00-02详见emac_lib.h与ethernetif.c,可在IE浏览器中输入查看，注：MDIX跳线未短接时，PC与EK板均需要通过UTP网线接至交换机，MDIX短接时可用网线直连PC。-Can be used directly Atmel AT91SAM7X256_EK board a simple Web server program, AT91SAM7X256 (MAC)+ DM9161AE (PHY), Web procedure set IP address of 192.168.131.200, MAC address 00-30-6C-00-00-02 see emac_lib.h and ethernetif.c, in IE browser, enter the view, note: MDIX when the jumper is not shorted, PC and EK boards come through UTP cable connected to the switch, MDIX cable shorted available when Direct Connect PC.

Create a PIC18 port of the uC/OS-II real-time kernel. Note here PIC18 port means a version of the real-time kernel, not the I/O port of microcontrollers.

非常经典的８０５１Ｆ０４０代码，跑一个裁减的小系统，ＵＣＯＳ－

stm32 ucos +ucgui LCD开发(stm32 ucos+ucgui LCD)

ads环境下把uc/gui移植到44b0上的源代码. 硬件使用优龙开发板.-ads put under uc/gui 44b0 transplanted to the source code. You use the hardware Lung Development Board.

STM32F103C8T6的UCOS 创建2个任务. 为了能够进入调试模式，必须在 stm32f10x_conf.h 文件中定义 DEBUG。它为 SRAM 的外设结构中创建了一个指针。于是调试变得很容易而且所有寄存器的设置都可以通过转储 外设来获得。