S3C2410移植uCOS

一个中间件平台，用于嵌入式系统的开发研究中。解压即可。-a middleware platform for embedded system development study. Decompression can be.

本人自己移置的ucosii2.76代码，适用于lpc22xx,lpc21xx，目前已经在实际项目中使用，代码中提供有建好的项目。开发环境为ads1.2。-shift their own ucosii2.76 code applies to lpc22xx, lpc21xx, now in the actual use of the project, code for the project is completed. Development environment for ads1.2.

一本讲uC/OS的很好的书，内容包括系统的安装、任务、实时系统、内核、中断、任务间通讯等。-This is the Chinese translation of the book on uC/OSII, contents include installation of system, task, real-time system, kernel, interrupt, communication among tasks etc..

此为针对凌阳SPCE061A板进行的uCOS2.00版本的移植，编译通过且运行正常，自带一个LED灯的实验，可以直接看到效果。-This is the board for Sunplus SPCE061A conducted uCOS2.00 version of transplantation, the compiler and run through the normal LED lamp comes with an experiment, you can directly see the effect.

UCOS的LWIP 1.10

说明：  这是按照前面我发的从零开始学习ucosii手册，编写成功的模板。芯片是stm32f103c8t6，移植在f103芯片上，都是同理可得。记住虽然可以直接拿着用，但是要修改对应的IO口哦，程序效果是led小灯闪烁。（有一个问题我也不太清楚，理论上c8t6的启动文件应该是startup_stm32f10x_md.s，但是用它却不能成功。用startup_stm32f10x_hd.s却成功了。）(This is a successful template written in front of the uCOSII manual that I started from zero. The chip is stm32f103c8t6, and the transplant is on the F103 chip. Remember that although it can be used directly, but to modify the corresponding IO mouth Oh, the program effect is the LED light flicker. (there is one problem I'm not very clear about. In theory, c8t6's startup file should be startup_stm32f10x_md.s, but it can't be successful with it. It was successful with startup_stm32f10x_hd.s.))

ucosiim430os

UCOS在lm3s615上的移植，可以适用keil或者realview 编译(UCOS in lm3s615 on the transplant, can be applied or RealView compiler keil)

说明：  基于stm32f1的 ucosII开发手册 包含移植、代码讲解等(UcosII development manual based on stm32f1 Including porting, code explanation, etc.)

点菜系统的界面设计，用vc打开模拟，用在UCOS(A la carte system interface design, analog, used in UCOS vc open)