PKE（被动无钥门禁系统，汽车车门控制）整个系统遥控部分源代码。...

针对philips的51单片机LPC931的具体应用的例子。实现对uart, spi, i2c等硬件资源的操作。还有针对小内存单片机操作系统的实现。-against Philips Microcontroller 51 LPC931 the specific application examples. Implementation of UART, 20, i2c hardware resources operation. There are small memory microcontroller operating system is achieved.

AT24C02的应用例程，进行eeprom和I2C的应用设计-AT24C02 Application routines for I2C EEPROM and Application Design

内容：1、本程序用于测试4相步进电机常规驱动 2、需要用跳帽或者杜邦线把信号输出端和对应的步进电机信号输入端连接起来 3、速度不可以调节的过快，不然就没有力矩转动了 4、按s4（设置成独立按键模式）可以控制正反转 -Contents: 1, the procedure used to test the four-phase stepper motor-driven two conventional, need to jump cap or the signal output line of DuPont and the corresponding stepper motor signal input terminal connected three speed adjustment can not be too fast, Otherwise, there would be no moment of rotation of the four, according to s4 (set to form an independent key mode) can control the positive inversion

BH1415F调频台控制C程序。使用AT89C52单片机，12MHZ晶振，用共阳四位LED数码管。频率数据转换为显示用BCD码函数。-C FM BH1415F control procedures. AT89C52 single-chip microcomputer use, 12MHZ crystal, with a total of four LED digital tube Yang. Frequency data into a display function using BCD code.

针对avr单片机编的精确延时程序，可达1微妙-against avr microcontroller series of the precision delay procedures, up to a delicate

IO口模拟串口，c语言编写，使用一个定时器中断-Serial IO mouth simulation, c language, the use of a timer interruption

这是一个很好的学习工程，对于初学都是一个难得的好资料，完整！-This is a good learning project for the beginner is a rare good information, complete!

• 状态1：8个LED发光二极管依次点亮。 • 状态2：8个LED发光二极管全亮后，则全部熄灭。 • 状态3：循环上述两个状态。-err

单片机入门教学-Singlechip tutorial