serial

串口扩展资料，从官网上下载，具体内容见其中(Serial expansion of information downloaded from the official, the specific content of which see)

基于SerialPort的串口调试助手代码，运行平台VS2010，MFC工程文件(Based on the serial debugging assistant SerialPort code, run the platform VS2010, MFC project file)

说明：  自己编写的变异的modbus，先分享给大家(the modbus by myself,now give all)

可编程器件厂商Altera出品的8b10b编码器源代码(Giga8b10b v10)

通过串口来通信，控制PLC，单片机各种伺服变频等实现运动。(Through serial port to communicate, control PLC, microcontroller servo frequency conversion and so on to achieve movement.)

1.实现了对串口2的操作。 2.利用DMA+空闲中断+串口，完成了对变帧长数据的接收与发送。(1. To achieve the serial port 2 operation. 2. Using DMA+ idle interrupt+ serial port, completed the variable frame data reception and transmission.)

支持9600，19200等常用各种波特率及自定义波特率，可以自动识别串口，能设置校验、数据位和停止位，能以ASCII码或十六进制接收或发送任何数据或字符，可以任意设定自动发送周期,并能将接收数据保存成文本文件，能发送任意大小的文本文件。 硬件连接方面，传统台式PC机支持标准RS232接口，但是带有串口的笔记本很少见，所以需要USB/232转换接口，并且安装相应驱动程序。(Support 9600, 19200 and other commonly used baud rates and custom baud rates, can automatically identify serial ports, can set check, data bits and stop bits, can receive or send any data or characters with ASCII code or hexadecimal, can arbitrarily set the automatic transmission cycle, and can save the received data into text files, can send any data. Text files of meaning size. In terms of hardware connection, traditional desktop PC supports standard RS232 interface, but notebooks with serial port are rare, so USB/232 conversion interface is needed and corresponding driver is installed.)

机器人小车串口通讯程序，采用stm32单片机，供大家交流(Serial Communication Program of Robot Car for Communication)

使用perl实现简单的串口通信；在串口上循环读写命令，可用于对串口通信的压力测试；(Using perl simple serial communication read and write commands on the serial loop, can be used for serial communication test pressure )

使用VC.NET编写串口通信程序，是很好的串口调试软件(Use VC.NET write serial communication program is a very good serial debugging software)