1

说明：  一个关于mega8的AD转换和串口发送接收程序，转换结果用数码管显示···(One of the AD converter and serial mega8 receiving program to send the conversion result with digital display···)

实现STM32的bootloader设计，参考代码，可以实现stm32串口bootloader(The bootloader achieve STM32 design, reference code, can achieve stm32 serial bootloader)

《单片机C语言程序设计实训100例—基于8051+Proteus仿真》案例(failed to translate)

说明：  编制MCS-51程序使步进电机按照规定的转速和方向进行旋转，并将已转动的步数显示在数码管上。 　　步进电机的转速分为两档，当按下S1开关时，加速旋转，速度从10转/分加速到60转/分。当松开开关时，减速旋转，速度恢复为10转/分。当按下S2开关时，按照逆时针旋转；当松开时，按照顺时针旋转。 　　本程序要求使用定时器中断来实现，不准使用程序延时的方式。(The MCS-51 program is programmed to rotate the stepper motor according to the specified speed and direction, and the number of steps that have been rotated is displayed on the digital tube. Stepper motor speed is divided into two gears. When the S1 switch is pressed, the speed is accelerated from 10 rpm to 60 rpm. When the switch is loosened, the speed will be reduced to 10 rpm. When pressing the S2 switch, rotate counterclockwise; when loosening, rotate clockwise. This procedure requires the use of timer interrupt to achieve, do not use the way of program delay.)

正点原子STM32F103精英板按键外部中断例程(Punctual Atom STM32F103 Elite Panel Key External Interruption Routine)

DALI调光详细讲解，软硬件齐全，不可多得的好材料(DALI dimming elaborate hardware and software is complete, the rare good material)

说明：  <基于单片机的数字钟设计> 个人做的毕业设计,带Protel图,源代码用proteus软件仿真通过,附有毕设论文(<Based on single-chip digital clock design> individuals do graduate design, with Protel map, the source code through the use of Proteus software simulation, complete with paper-based)

binary reading implementation

说明：  基于STM32F103单片机的ADC测试源码(ADC test source code based on STM32F103 MCU)

操作stc单片机内部eeprom程序实例(Operation stc microcontroller internal eeprom program instance)