相参积累

(1)建立DQPSK调制和解调 SIMULINK仿真模型，评估其在AWGN信道和瑞利衰落信道下的误码率性能（画出信噪比变化时的误码率曲线）； (2)基于（1）建立的SIMULINK仿真模型，分别在AWGN信道和瑞利衰落信道下发送一个实际音频文件，在接收端实时播放出来((1) the DQPSK modulation and demodulation SIMULINK simulation model is established to evaluate the bit error rate performance under the AWGN channel and the Rayleigh fading channel (the bit error rate curve when the signal to noise ratio changes). (2) based on the (1) established SIMULINK simulation model, a real audio file is sent under the AWGN channel and the Rayleigh fading channel respectively, and it is played on the receiving end in real time.)

Information fur the Eltergeldl

用于检测手机麦克风输入音量大小的DEMO(it s used to detect the volume of phones micphone)

说明：  基带信号QPSK和16QAM的调制仿真，绘制误码率和误符号率的曲线(Base band signal QPSK and 16QAM modulation simulation, drawing error rate and error symbol rate curve.)

使用verilog实现全数字16QAM调制器，载波频率1MHZ，数据比特流的速率为100Kbps,(the modulation of 16QAM based on FPGA)

说明：  在信号发送后，接收方需要实现位同步才能正确解码(after signal is sent, receiver need bit syn to decode correctly)

说明：  bpsk调制仿真，可直接用 1、数字调制方法 数字调制就是把数字基带信号的频谱搬移到高频处，形成适合在信道中传输的带通信号。基本的数字调制方式有振幅键控（ASK）、频移键控（FSK）、绝对相移键控（PSK）、相对（差分）相移键控（DPSK）。在接收端可以采用想干解调或非相干解调还原数字基带信号。 数字信号的传输方式分为基带传输和带通传输。然而，实际中的大多数信道（如）无线信道具有丰富的低频分量。为了使数字信号在带通信道中传输，必须用数字基带信号对载波进行调制，以使信号与信道的特性相匹配。(1, digital modulation method Digital modulation is the transfer of the spectrum of a digital baseband signal to a high frequency to form a bandpass signal suitable for transmission in the channel. The basic digital modulation methods are amplitude keying (ASK), frequency shift keying (FSK), absolute phase shift keying (PSK), and relative (differential) phase shift keying (DPSK). At the receiving end, the digital baseband signal can be restored by using dry demodulation or non-coherent demodulation. Digital signal transmission methods are divided into baseband transmission and bandpass transmission. However, most channels in practice, such as wireless channels, have rich low frequency components. In order for a digital signal to be transmitted in a band channel, the carrier must be modulated with a digital baseband signal to match the signal to the characteristics of the channel.)

explains OFDM transmitter AM/PM effect at 64QAM signals

该程序能够较好的仿真出Missive MIMO系统下 信道估计的误码率，及还 有部分的MSE代码，可以供大家参考一下！(This program can better simulate the error rate of channel estimation under Missive MIMO system, and also There are some MSE code that you can refer to!)

This project demonstrates OFDM with adaptive modulation applied to Multiple-Input Multiple- Output (MIMO) systems. The analysis and simulation is considered in two stages. The rst stage involves the application of a variable-rate variable-power MQAM technique for a Single-Input Single-Output (SISO) OFDM system. The second stage applies adaptive modulation to a general MIMO system by making use of the Singular Value Decomposition to separate the MIMO channel into parallel subchannels.