LPC177x_178x_UM_CN_withBookmark

在STM32中实现UCGUI的移植，在STM32中显示UCGUI界面，功能十分强大，移植在MINI板上。(The transplant UCGUI achieve STM32, the display UCGUI interface is very powerful, transplant MINI board in the STM32.)

飞思卡尔两轮车代码内置pid算法内外环以及串级pid控制(Freescale two-wheeled vehicle code built-in PID algorithm inner and outer loop and cascade PID control)

串口与NANDflash的应用与设计希望代码对你们有帮助(UART NANDFLASH)

基于ARM的UART串口驱动程序，并且能够对PC机串口的波特率进行自适应。(Based on ARM)

说明：  本示例基于stm32f103外设固件库开发的AD7091驱动程序，内涵初始化和AD获取操作代码。 在项目中亲测可以正常运行和使用，适合参考作为二次开发。(This example is based on the ad7091 driver developed by STM32F103 peripheral firmware library, which initializes the connotation and obtains the operation code of AD In the project, the pro test can run and use normally, which is suitable for reference as the secondary development.)

Firmware for ST-Link

在stm32l073上面，移植 rtthread ,测试成功(Porting rtthread on stm32l073 successfully)

STM32f103vet6 _BMS_ SOC CODE

STM32启动文件分析注释 startup (STM32 startup)

说明：  自动控制窗帘，51单片机 protuse仿真(Automatic control curtains, 51 microcontroller protuse in simulation)