GPS-power-inversion

零死角玩转STM32 初级篇 中级篇 系统篇.zip(Zero Dead Corner Play STM32 Junior Intermediate Systematic Paper.zip)

lcm12864液晶显示，包含液晶初始化，汉字库调用，位置设置(lcm12864 liquid crystal display, including LCD initialization,汉字库call, location settings)

stm32f103c8t6 驱动0.96oled四角屏显示曲线，很好的绘制各种曲线(Stm32f103c8t6 drives 0.96 OLED quadrangular screen display curve, which can draw all kinds of curves well.)

该书讲述了电磁波的兼容性与如何通过使用计算机构建EMC模型(The study of electromagnetic compatibility(EMC) is a young old science.It is relatively old because the problem of RFI(radio-frequency interference))

水位监测与水闸控制系统是通过Arduino主板与我们的超声波水位检器对接，由程序来实现对水位数据的检测与反馈，然后根据反馈信号的情况来控制闸门调节水位，同时在水位超出预定范围时发出不同级别预警信号。(The water level monitoring and control system of sluice is through the Arduino motherboard and our ultrasonic level detector by docking procedures to achieve detection of water level data and feedback, and then according to the feedback signal to control the gate level adjustment, at the same time exceeds a predetermined range when the water level is a different level of warning signal.)

使用STM32实现AD8803的adc电压输出(ADC Voltage Output of AD8803)

说明：  智能仪表硬件系统测试程序 蜂鸣器自检：确定蜂鸣器正确 LED（LCD） 显示器自检：确定LED（LCD） 显示器每一段均正确 键盘自检： 确定键盘正确 ④其他(Intelligent Instrument Hardware System Test Program Buzzer self-test: confirm that buzzer is correct LED (LCD) Display Self-Check: Make sure that every segment of the LED (LCD) display is correct Keyboard Self-Check: Make sure the keyboard is correct)

本实验将实现如下功能：开机的时候先检测SD卡和SPI FLASH是否存在，如果存在则获取其容量，并显示在LCD上面（如果不存在，则报错）。之后开始USB配置，在配置成功之后就可以在电脑上发现两个可移动磁盘。我们用DS1来指示USB正在读写，并在液晶上显示出来，同样，我们还是用DS0来指示程序正在运行。(This experiment will achieve the following functions: when booting, first detect the existence of SD card and SPI FLASH, and if there is, obtain its capacity, and display it on the LCD (if not, report an error). Then the USB configuration is started, and after the configuration is successful, two removable disks can be found on the computer. We use DS1 to indicate that the USB is reading and writing, and display it on the LCD. Similarly, we use DS0 to indicate that the program is running.)

说明：  基于stm32实现的CAN读取OBD数据，通过串口上传至上位机(CAN Reading OBD Based on stm32)

BIOS Tool for updating and flashing the BIOS. It works on most modern UEFI BIOSes. This is the latest version. Enjoy the package.