01301699

有关多普勒频移与距离的关系的matlab仿真(doppler shift)

多径条件下基于WSF的均匀圆阵幅相误差自校正(WSF-based multipath conditions of uniform circular array amplitude and phase error self-correction)

LDPC的矩阵生成，准循环码矩阵的生成，采用PEG算法生成，使用块矩阵方法(produce QC-LDPC matrix)

说明：  整个仿真系统是从发射端、瑞利信道、接收端大致的过程(The entire simulation system is a rough process from the transmitter, the Rayleigh channel, and the receiver)

说明：  DDE CLIENT,用于dde方式读区服务器内容(DDE Client for dde reading of server content)

通过串口解析MODBUS协议 读开关量型的输入信号 读保持寄存器上的内容 批量写数据到保持寄存器(Resolving MODBUS Protocol through Serial Port Input signal of reading switch type Read and hold registers Write data in batches to hold registers)

在实际的调谐解调电路中，采用的是非相干载波解调，本振信号与发射端的载波信号存在频率偏差和相位抖动，因而解调出来的模拟I、Q基带信号是带有载波误差的信号。这样的模拟基带信号即使采用定时准确的时钟进行取样判决，得到的数字信号也不是原来发射端的调制信号，误差的积累将导致抽样判决后的误码率增大，因此数字QPSK解调电路要对载波误差进行补偿，减少非相干载波解调带来的影响。(In the actual tuning and demodulating circuit, non-coherent carrier demodulation is adopted, and the frequency deviation and phase jitter of the local oscillator signal and the carrier signal of the transmitting end are present, and thus the demodulated analog I and Q baseband signals are signals with carrier error.)

4psk仿真作业 仿真4psk的性能曲线 误码率 和理想误比特率(4psk simulation)

数字调制-OFDM-QPSK-峰均比-资料,很好很详细，学习ofdm很好的资料(Digital Modulation-OFDM-QPSK-PAR- information, very very detailed, very good information to learn ofdm)

已经调试成功.内含m文件，可直接运行，实现六自由度运动学逆解算法，供做算法研究人员参考。( Has been successful debugging. M contains files can be directly run, Six degrees of freedom to achieve inverse kinematics algorithm, Algorithm for researchers to do reference.)