psk-gui

adaptive noise cancellation using lms algorithm

In pattern recognition and in image processing, feature extraction is a special form of dimensionality reduction.

说明：  任务：设计一个4×2.5Gbit/s 长距离光纤传输系统，并利用OptiSystem 仿真验证。 要求： 1．采用波分复用技术，波长设置以100GHz 为间隔，频率分别为193.1THz、193.2THz、193.3THz、193.4THz，每个波长传输速率为2.5Gbit/s（NRZ），传输距离为300km。采用常规光纤，光纤损耗系数为0.25dB/km。 2．单通道光发送机最大输出功率为0dBm，光接收机的接收光功率不低于－26dBm，过载点为－10dBm。 3．可以采用EDFA 作为线路放大器，其中EDFA 的输入功率限制在－18～2dBm，最大输出功率20dBm，增益范围为13～25dB，噪声指数4.0dB。(Task: Design a 4 x 2.5 Gbit/s long-distance optical fiber transmission system, and use OptiSystem simulation to verify. Requirement: 1. Using wavelength division multiplexing technology, the wavelength is set at 100GHz intervals, with frequencies of 193.1 THz, 193.2 THz, 193.3 THz and 193.4 THz, respectively. The transmission rate of each wavelength is 2.5 Gbit/s (NRZ), and the transmission distance is 300 km. The loss coefficient of conventional optical fibers is 0.25dB/km. 2. The maximum output power of a single-channel optical transmitter is 0 dBm, and the receiving power of an optical receiver is not less than -26 dBm, and the overload point is -10 dBm. 3. EDFA can be used as line amplifier, where the input power of EDFA is limited to - 18-2dBm, the maximum output power is 20dBm, the gain range is 13-25dB, and the noise index is 4.0dB.)

the attached file consists of matlab code for implementation of sequential importance sampling particle filter given in IEEE paper entitled as "A TUTORIAL ON PARTICLE FILTERS FOR ONLINE NONLINEAR NON GUASSIAN BAYESIAN TRACKING"

high voltage direct current

说明：  c source Code for arthmetic

GW, stretch, wp color correction techniques

重叠相加法计算圆周卷积,内含运用重叠相加法计算圆周卷积的matlab 程序代码及调试结果(The overlap-add method for circular convolution)

说明：  PLL性能,仿真,设计handbook,总结了常用的PLL结构和性能,对设计PLL很有帮助(PLL performance,simulation,design handbook)

用于自定义文件的路径和分类显示特定类型的文件菜单，适用于matlab GUI设计(for documents from the path definition and classification of specific types of shows the File menu, in Matlab GUI design)