addressbook

LabVIEW编写的多通道数据采集程序，此程序为针对加速度传感器采集编写的，可以适当的修改成为像应力传感器等。LabVIEW版本为7.0和DAQmx8.0。(LabVIEW prepared by the multi-channel data acquisition procedures, This procedure against the acceleration sensor acquisition preparation, appropriate changes can be as stress sensors. LabVIEW version 7.0 and DAQmx8.0.)

1602显示DS1302实时时钟代码程序(1602 LCD DS1302 real-time clock)

AT90S2313 Push Switch Led Blinking

AD9851驱动程序，采用串行写入方式，STM32写入频率控制字。(AD9851 driver, using serial write mode, STM32 write frequency control word.)

说明：  由uc1698u控制器的64K色液晶屏驱动程序，包含基本功能（打点，画水平线，画垂直线），总线方式，ARM平台。（非本人原创，忘记出处）(By the uc1698u 64K color LCD controller driver, includes the basic functions (dot, horizontal painting, drawing vertical line), bus way, ARM platform. (Non-original, I forget the source))

工业中实时温度曲线显示仿真程序，采用了第三方控件，提出来大家一起研究。(tempratrue)

作为avr最小系统的测试程序,所有IO口都发光(As avr minimum system testing procedures, all the IO ports are luminous)

说明：  开机的时候先检测 24C02 是否存在，然后在主循环里面检测两个按键，其中 1 个按键（KEY1） 用来执行写入 24C02 的操作，另外一个按键（KEY0） 用来执行读出操作，在 TFTLCD 模块上显示相关信息。同时用 DS0 提示程序正在运行。(When booting, it first detects the existence of 24C02, and then detects two keys in the main loop. One key (KEY1) is used to write 24C02, and the other key (KEY0) is used to read out, displaying relevant information on the TFTLCD module. At the same time, the DS0 prompt program is running.)

MPU6050传感器的六轴姿态解算算法代码(Six-Axis Attitude Solution Algorithmic Code for MPU6050 Sensor)

the value of signatureAlgorithm field of the structure private AlgorithmIdentifier algId .