GPS_WIRELESS_RXD

Thumb ARM Interworking Image for lpc(ARM Thumb Interworking Image for lpc)

说明：  嵌入式设备驱动，mini2440，按键中断，结合开发板使用(Embedded device driver, mini2440, key interruption, combined with development board)

说明：  Jlink V7的详细使用说明，包括flash烧写和ADS调试，原创。(jlink V7 introduction)

基于ARM Cortex M0的在线编程（IAP）实现，可实现将数据存储在Flash中，但不影响现有程序，芯片类型NXP LPC1114(Based on the ARM Cortex M0 Online Programming (IAP), the data stored in Flash, but does not affect the existing procedures, types of chips NXP the LPC1114)

nxp-lpc1768 zlg dac转换程序，实例程序。(nxp-lpc1768 zlg dac)

说明：  在s3c2410上实现的蜂鸣器程序代码，可以进行改进(Achieved in the S3C2410 buzzer code, you can improve)

PMSM 180°正弦波无位置传感器FOC程序(PMSM 180 sensorless FOC program.)

STM32F103VET6 移植FREEMODBUS 能够写 输入输出寄存器 保持寄存器 ！ (STM32F103VET6 FREEMODBUS input and output registers holding register!)

说明：  STM32的PWM输出模式，STM32的TIM1模块是增强型的定时器模块，天生就是为电机控制而生，可以产生3组6路PWM，同时每组2路PWM为互补，并可以带有死区，可以用来驱动H桥。(STM32' s PWM output mode, STM32' s TIM1 module is enhanced timer module, is inherently for the motor control, it can produce three groups 6-channel PWM, while the complementary PWM each 2-way, and can be with the dead zone, can be used to drive H-bridge.)

msp430 program for flash read write and copy from ram to flash