ADcaijimokuai

用于步进电机细分驱动，MSP430F149配置TMC429，进而驱动TMC249，细分驱动(Subdivision driver for stepper motor, MSP430F149 configuration TMC429 turn drives TMC249 Subdivision Driver)

说明：  这是我毕业设计作品，基于TC35的GSM超速报警系统。包括串口控制TC35，点阵LED驱动显示。(This is my graduation work, based on the GSM TC35 overspeed alarm system. Including the serial control TC35, dot matrix LED display driver.)

基于pic16f676 EEPROM的问题 用软件仿真没问题，但烧到片子里，不能正常运行。情况是这样的：假如循环向EEPROM中写数据，9，8，7，6，5，4，3，2，1，然后读，发现每一位读出的都一样，是写循环中第一个写进去的字节，也就是9。其他的并没有写进去。 EEPROM的写通过判断标志位就可以，但是在下一次写之前要清除上一次写完成的标志位。也就是说，每次写完要清除完成标志位，否则下一次写不进去。(Based on pic16f676 EEPROM problem With the software simulation no problem, but burn to film, not normal operation. The fact of the matter is: if cycle to write the data of EEPROM, 9,8,7,6,5,4,3,2,1, then read, and found that each of the read, write the first cycle is written in bytes, also is 9. The other are not written in. Write through the judgement of EEPROM sign a can, but in the next write to remove the last completed before writing the sign of a. That is, every time to remove the written finish marks a, or the next write in. )

一个用saber仿真的boost闭环控制电路(A boost with a saber simulation of closed-loop control circuit)

本程序是24C128的51单片机读写程序。 测试芯片：at89s52 晶振：12MHz有keil、proteus文件和24c128的英文文档和详细注释(This procedure is 24C128 microcontroller to read and write program 51. Test chip: at89s52 crystal: 12MHz with keil, proteus file and 24c128 documents and detailed notes in English)

ad7746,电容转换芯片，~~~~~~~~~(ad7746, capacitance detection)

欧姆龙可编程控制器驱动程序欧姆龙可编程控制器驱动程序(omron sysmac cp1h progremmable dev1ce dirver)

关于步进电机的微步原理分析，微步和全步的比较(step motor microstep vs full step)

12864液晶模块开发源代码，12864液晶模块开发源代码(LCD)

开发环境为RVDS4.0，基于开发板Tiny6410，该程序为裸机控制程序，实现串口打印，实现方式：程序下载后打印串口信息； 显示为：a hello Uart(Development environment for RVDS4.0, based development board Tiny6410, the program for the bare metal control procedures to achieve serial printing, implementation: After the download serial print information shown as: a hello Uart)