waveproducer

说明：  该程序能够实现PWM波输出，同时实现流水灯功能，(The program can realize PWM wave output and water lamp function,)

– 133 条指令 – 大多数可以在一个时钟周期内完成 　　– 32 x 8 通用工作寄存器 + 外设控制寄存器 　　– 全静态工作 　　– 工作于16 MHz 时性能高达16 MIPS 　　– 只需两个时钟周期的硬件乘法器(--133 Instruction- most can be completed in one cycle- 32 x 8 General Purpose Working Registers+ Peripheral Control Registers- Fully Static Operation- Work performance at 16 MHz up to 16 MIPS- only two clock cycle hardware multiply device)

一个nokia5110液晶的显示程序，用于51单片机，能方便的控制显示内容以及位置。(A nokia5110 LCD display program for 51, can easily control the display content, and location.)

IIc应用，AT24C512初始化，清零，存储，读取多字节存入 写入多字节(IIc applications, initialization, clear, store, read, write more bytes into a multi-byte)

通过matlab建立整车模型，求汽车的平顺性，本程序求得是汽车在不同等级路面上的悬架动挠度。(Suspension dynamic deflection)

基于pic16f676 EEPROM的问题 用软件仿真没问题，但烧到片子里，不能正常运行。情况是这样的：假如循环向EEPROM中写数据，9，8，7，6，5，4，3，2，1，然后读，发现每一位读出的都一样，是写循环中第一个写进去的字节，也就是9。其他的并没有写进去。 EEPROM的写通过判断标志位就可以，但是在下一次写之前要清除上一次写完成的标志位。也就是说，每次写完要清除完成标志位，否则下一次写不进去。(Based on pic16f676 EEPROM problem With the software simulation no problem, but burn to film, not normal operation. The fact of the matter is: if cycle to write the data of EEPROM, 9,8,7,6,5,4,3,2,1, then read, and found that each of the read, write the first cycle is written in bytes, also is 9. The other are not written in. Write through the judgement of EEPROM sign a can, but in the next write to remove the last completed before writing the sign of a. That is, every time to remove the written finish marks a, or the next write in. )

说明：  串口控制舵机，可以任意输入角度然后根据串口输入的角度旋转(Serial port control steering gear)

ads931系列dds芯片编程，适用于c8051f120单片机，包括其中主文件和头文件，c8051系列的单片机都可以用(ads931 series dds chip programming for c8051f120 microcontroller, including the master file and the header files, c8051 series of microcontrollers can be used)

c8051f060单片机的flash程序，调试通过(c8051f060 microcontroller flash program, debug through)

以8051为基础的有键盘；有液晶显示器；有传感器前置调理电路的数据采集器控制程序。(8051-based data acquisition control program)