cx4_2

刚刚找到的，貌似还可以用，请下载的话，自己修改一下，别让老师发现就行了！(Just found, looks like you can use, download it, its changed a bit, do not let the teacher found on the line!)

利用modmap函数对ask、fsk、msk以及psk进行使用说明(use modmap function ask, fsk, msk and psk for use)

This file has the code for GMM classification technique

含风机和statcom补偿的小型输电系统，可以模拟风力波动、母线故障、风电投切造成的电能质量问题，并通过statcom补偿稳定母线电压并滤除谐波，效果较好，与大家分享。(The small power transmission system with fan and statcom compensation can simulate the power quality problems caused by wind power fluctuation, bus fault and wind power switching, and stabilize the bus voltage by statcom and filter out the harmonics, and it is better to share with you.)

说明：  用于计算庞加莱截面的MATLAB的源程序(MATLAB Program for Making Poincare Section)

本例源代码文件由用户按照书中的操作步骤自己生成，“Example-2-1Project_Navigator_Demo源代码”目录下为源代码的参考文件。“Example-2-1Project_Navigator_Democounter”目录下为完整的工程，包括源代码文件、综合与实现的结果文件、ISE工程文件等，可以使用ISE工程管理器打开工程，供读者参考(In this case the source code files by the user in accordance with the steps the book itself is generated, "Example-2-1 Project_Navigator_Demo source" directory as the source code reference document. "Example-2-1 Project_Navigator_Demo counter" directory for a complete project, including source code files, integrated with the realization of the outcome document, ISE project file, etc. You can use ISE Project Manager, open the project for the reader is referred to)

高速铁路路基沉降是一个复杂的系统过程,涉及不同时期、不同工况,选用单一的预测模型不足以反映路基整体的变形规律.Logistic模型及Verhulst模型的曲线均为S形,可以反映全过程的地基沉降与时间的关系.针对路基填筑期和降水期两个时段利用MATLAB软件编制程序计算模型参数,得到Logistic模型和灰色Verhulst模型,进而求得两者的最优加权组合模型.对比结果表明:在路基填筑期由两者的最优加权组合模型预测得到的结果与实测结果较吻合,拟合精度高于单一模型 而在降水期Verhulst模型的预测值更接近实测值,平均相对误差约为1.75％,拟合精度较高.(High-speed railway subgrade settlement process is a complex system involving different times and in different conditions, the choice of a single forecasting model does not adequately reflect the overall deformation of roadbed. Curve Logistic model and Verhulst models are S-shaped, the whole process can be reflected foundation settlement versus time. against roadbed construction period of two hours and precipitation using MATLAB software programming model parameters, the Logistic model and gray Verhulst model, and then get the optimal model of a weighted combination of the two. comparative results indicate : results and experimental results in the roadbed construction period by the weighted combination of the best of both models predicted than the anastomosis fitting accuracy than a single model precipitation predicted value of Verhulst model closer to the actual value of the average relative error approximately 1.75 fitting accuracy.)

The performance of fuzzy logic (FLC)control optimized by particle swarm optimization (PSO) for semi-active suspension system using magneto-rheological (MR) damper . MR damper is an intelligent damper filled with particle magnetic polarizable and suspended into a liquid form. The Bouc-Wen model of MR damper is used to determine the required damping force based on force-displacement and force-velocity characteristics.

用matlab实现基于网格匹配的图像拼接，其中网格大小需要自己依据图片大小进行调整(Using matlab to achieve grid-based matching of image mosaic, in which the size of the grid need to be adjusted based on image size)

射线追踪的源代码程序，应用于地震勘探的相关内容。(Ray tracing of the source code program, used in seismic exploration-related content.)