01_LED

GUI用户界面用来显示电路波形，即示波器，STM32编程实现(STM32 and GUI for application to show electronic waves accounting for testing the circuits.)

使用方法： 程序设置了ENC28J60的IP为192.168.0.15，模块通电后与电脑的网口用网线连接起来， 设置电脑的本地IP为192.168.0.**（**自定），网关为192.168.0.15,其他默认，配置 成功后便可以arp或ping模块。 打开浏览器，在地址里输入http://192.168.0.15/123456可打开开发板简单网页，页 面上通过按键来控制开发板LED的亮灭。(Use: setup the ENC28J60 of IP to 192.168.0.15, the module is powered on the computer' s Ethernet port using a cable connection up to set the computer' s local IP 192.168.0.** (** Custom), the gateway 192.168.0.15, default configuration is successful, it will make arp or ping module. Open the browser, enter the address http://192.168.0.15/123456 to open the development board simple web pages, and page keys to control the development board LED light off.)

基于周立功CAN的上位机软件，可以实现对CAN的打开，波特率设置，滤波设置，消息发送，消息接受等等。亲测可用。完全可以作为二次开发的资料。(Based ZLG CAN PC software can be achieved on the open CAN baud rate settings, filter settings, the message is sent, the message to accept more. Pro-test available. Can be used as secondary development information.)

利用ULN2003A进行驱动，产生PWM波，里边有照片，可供参考，通过本例程了解PWM 的基本原理和使用 (#include <reg52.h> unsigned char timer1 sbit PWM=P1^2 void system_Ini() { TMOD|= 0x11 //PWM TH1 = 0xfe //11.0592 TL1 = 0x33 TR1 = 1 IE =0x8A } main() { system_Ini() while(1) { if(timer1>100) timer1=0 if(timer1<30) PWM=0 else PWM=1 } )

哈尔滨芯明天科技XE517系列压电陶瓷控制器配套上位机软件的开发例程，这个版本是VC6开发。发布时需要拷贝debug目录中的头文件和动态库文件到*.exe文件目录中。(Harbin XMT XE517 series of piezoelectric ceramic controller supporting PC software development routines, this version is VC6 development. When you need to copy the directory publishing debug header files and dynamic library files to*. Exe file directory.)

使用MSP430F5438单片机和HC-SR04超声波模块实现测距的源码。( Using the MSP430F5438 microcontroller and HC-SR04 ultrasonic ranging module source.)

根据对应的按键值，对应输出相应的电容值，并做掉电检测(According to the corresponding key value, corresponding to the output of the corresponding capacitance values ​ ​ and do brownout detection)

pt100高精度测量电路，精度误差小，速度快，arm9 c51均可实现 ，仅供学习 参考(PT100 high precision measurement circuit, precision error is small, fast, C51 ARM9 can be achieved, only for learning reference )

51单片机片上串口控制GPRS模块。用KEIL 软件调试成功。(51 MCU on-chip serial port to control the GPRS module. KEIL software debugging success.)

zigbee无线定位系统的相关程序代码。很有用 都有相关解释(zigbee location code)