With 51 single

SD卡读写程序 1. sdconfig.h: 该文件为SD卡读写模块配置头文件，用户可根据实际硬件条件进行修改. 2. SD目录: SD卡读写模块的全部文件,一般不用修改. 3. 建议sdconfig.h文件不要放于SD目录中，因为SD目录中的文件一般无须修改, 而sdconfig.h通常会有改动.-1. Sdconfig.h: The document for the SD card reader module configuration header files, the user hardware according to actual conditions can be modified. 2. SD directory: SD card reader module of all the documents, the general need not be amended. 3. Proposed sdconfig. h files directory should not be put in SD because SD files in the directory are not normally required to be amended and the changes are usually sdconfig.h.

LPC2378 LCD演示工程源代码，希望大家喜欢-LPC2378 LCD demo project source code, I hope everyone likes

基于80C51的一个例子程序,实现了流水灯操作-an example of the process and realized the water lights operation

匠人手机之按键研究，非常不错。搞按键设计的同学可以看看从中学习下-Artisan of the key mobile phone research, very good. Button designed to engage students learn can have a look at the next

端口控制发光二极管亮灭。 【硬件连接】通过SPCE061A的1位I/O端口（本例中使用IOA15端口），经一限流电阻后接一个发光二极管至地-Port control to eliminate bright light-emitting diodes. [] Through SPCE061A hardware connection of an I/O port (in this example, the use of IOA15 port), with a current limiting resistor followed by a light-emitting diodes to land

用单片机驱动1602的程序，只显示固定字符。C语言编的。-1602 single chip microcomputer-driven procedures, only shows a fixed character. C language compiled.

这是一个为51系列单片机开发的4*4键盘驱动程序。该驱动程序包括2个文件，使用时将C文件关联入工程，在调用文件前包含H文件即可。本键盘驱动程序具有两个接口函数提供两种扫描方式（阻塞和非阻塞），可以任意定制返回键值，具有防抖动处理，具体使用方法可以参见注释。（本程序在Keil C51开发环境中测试成功，并经过多次实践应用）。-This is a series of 51 MCU development of the 4* 4 keyboard driver. The drive included two documents, the use of paper will be linked into C, the call of documents containing H documents. The keyboard driver has two interface functions provide two scan mode (blocking and non-blocking), it will return to arbitrary custom keys with innovative and handling, the use of specific methods can be found in Notes. (This procedure Keil C51 development environment to test successful, and after several practice application).

关于DDSＡＤ９８５０图和程序串口程序主控单片机ＡＤＵＣ８１２-on DDSAD9850 plans and procedures for the control procedures Serial MCU ADUC812

此程序是我用AT89S52单片机来控制显示屏FYD12864,采用C语言编写的可以显示图形,我调试了一周,在此和大家一起分享-this procedure is used to control the microcontroller AT89S52 FYD12864 screen, using the C language can display graphics, I debugged week, the share with everyone

基于AVR单片机mega8的电表的C程序（第三部分，接收数据分析并回答）-Based on the AVR Microcontroller mega8 meter C-program (Part III, to receive data analysis and answers)