AVR 单片机驱动OV7660摄像头程序.

s3c44b0开发板tftp调试代码,芯片rtl8019，ads调试通过-s3c44b0 Development Board tftp debugging code, chip rtl8019, debugging through ads

S3C2440A的windows ce 5.0 bsp包，支持3串口，注册表存储-S3C2440A the windows ce 5.0 bsp package, support 3 serial, registry storage

ARMMP3ARM MP3解码源代码 1.0-ARMMP3ARM MP3 decoder source code 1.0

S3C2440 TouchLCD forADS编译器示例

世界时钟的一个显示程序及图形。自己下载看看吧-world clock and a graphic display program. Download let"s see it

ARM7芯片EP7312串口驱动源码-ARM7 chip EP7312 source Serial Driver

his project was built and tested with WinAVR-20060125. Make sure the MCU target define in the Makefiles corresponds to the AVR you are using!! To build the code, just install WinAVR and run "make" from the console in echomaster and echoslave subdirs. "make program" will program the device if you have a AVRISP attached. Remember to set the AVR device to at least 8MHz. The AVR may use the programmable clock from MC1319x, just remember to check if the MC1319x and SPI communication is working FIRST! Otherwise you wont get any clock signal to the AVR and then you can t program it or reset the fuses! The MC1319x has default clock output of 32kHz so you will have to set your programmer to a very low frequency (

本项目驱动hc05蓝牙模块发送和接收数据 请点击左侧文件开始预览 ！预览只提供20%的代码片段，完整代码需下载后查看 加载中 侵权举报

uip 0.6的中文说明，包含英文资料，非常全，好东西，协议站说明文档。-the Chinese that included English, very full, good things, the agreement stops documentation.

ARM9内核的philip公司的LPC3180初始化SDRAM的驱动代码-ARM9 core philip